567084
12
Zoom out
Zoom in
Previous page
1/14
Next page
Instructions.
6] You may also scan the band for SSB stations by slowly rotating the Rotary Tuning Knob [31]
through the selected band, tuning for the best intelligibility and watching for deflections on
the Signal Strength Indicator [k] in the display. (SSB transmit with a "suppressed carrier"
meaning the Signal Strength Indicator [k] in the display will fluctuate only when there is a
voice transmission and not during pauses in voice transmission.
7] As soon as you have located a SSB station (you will not be able to understand the speech)
switch to SSB reception by depressing the MODE button [7]. Continued pressing of the
MODE button [7] will alternate between USB and LSB. Try LSB for frequencies below 10
MHz or USB for frequencies above 10 MHz .
8] After tuning for maximum intelligibility switch MANUAL TUNING/STEP switch [5] to Slow
position and readjust Rotary Tuning Knob [31] for maximum intelligibility.
SWITCH SETTINGS
AM NARROW/WIDE(Switch 33)
For normal operation it is suggested that this switch be used in the wide position. If occasion arises
where a near-by station interferes with the station being listened to the AM Narrow/Wide switch should
be put into the narrow position.
STEREO RECEPTION
The ATS-909 is designed to receive FM stereo broadcasts with headphones connected to the stereo
headphone jack [29]. Switch 33 FM STEREO/MONO must be placed in the stereo position. Stereo icon
will appear in LCD display if headphones are connected.
VOLUME CONTROL
To adjust the volume control [34] to a comfortable postion. Make sure that control is set to
an adequate level when radio is set for waking up.
OPERATING LOCK (BUTTON 9)[ ]
The operating lock prevents unintentional altering of any of the functions once set or accidently turning
off the radio. Once set the ON/OFF switch and all tuning options become unalterable and can not be
reactivated until the lock switch is turned off. It is a good policy to turn on the lock switch when
transporting the radio as it will prevent the radio from being turned on accidently while in a bag or
suitcase. To turn the lock switch on press switch (9) [ ]. When the lock switch is the ON position a lock
symbol [ ] will appear in the display. To unlock radio press switch (9) [ ] again. This will unlock the
radio and remove the lock symbol from the display.
AERIALS
The ATS-909 comes equipped with a integrated ferrite antenna built into the radio that should provide
more then adequate reception for the MW and LW bands. For FM and SW reception it is advised that
the telescoping antenna be extended and adjusted in length and direction for maximum results.
11
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sangean ATS-909 W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sangean ATS-909 W in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info