651717
75
Zoom out
Zoom in
Previous page
1/94
Next page
Issues Solutions and Explanations
Sound First, perform the Sound Test to determine if your product audio is operating
properly. (Go to MENU Support Self Diagnosis Sound Test).
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the
sound is too low at maximum
volume.
Please check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc.) connected
to your product.
The picture is good but there
is no sound.
If you are using an external device, check the device’s audio output option. (Ex.
You may need to change your cable box’s audio option to HDMI if you have the box
connected to your product using an HDMI cable.)
If you are using a DVI to HDMI cable, a separate audio cable is required.
If your product has a headphone jack, make sure there is nothing plugged into it.
Reboot the connected device by disconnecting, and then reconnecting device’s
power cable.
The speakers are making an
inappropriate noise.
Check cable connections. Make sure a video cable is not connected to an audio input.
For aerial or cable connections, check the signal information. A low signal level may
cause sound distortion.
Perform the Sound Test feature. (MENU Support Self Diagnosis Sound Test)
RF (Cable / Aerial) Connection
The product is not receiving
all channels.
Make sure the coaxial cable is connected securely.
Please try Setup to add available channels to the channel list. Go to MENU System
Setup and wait for all available channels to be stored.
Verify the aerial is positioned correctly.
The picture is distorted:
macro block error, small
block, dots, pixelisation.
The compression of video contents may cause picture distortion, especially with fast
moving pictures such as sports and action movies.
A weak signal can cause picture distortion. This is not a product problem.
Others
Purple/green rolling
horizontal bars and buzzing
noise from the product
speakers with a Component
cable connection.
Remove the left and right audio connections from the Set-Top box. If the buzzing
stops, this indicates that the Set-Top box has a grounding issue. Replace the
Component video cables with an HDMI connection.
The picture won’t display in
full screen.
HD channels will have black bars on either side of the screen when displaying up

Black bars will appear on the top and bottom of the screen when you watch movies
that have aspect ratios different from your product.
Adjust the picture size options on your external device or the product to full screen.
English - 75
Other Information
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung V27F390FE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung V27F390FE in the language / languages: English as an attachment in your email.

The manual is 12,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info