621307
51
Zoom out
Zoom in
Previous page
1/70
Next page
English _51
SETUP SCREEN
Audio detection
You can set to detect sound over the specified level and trigger an event accordingly.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Audio detection>.
3.
Set whether or not to
<
Enable
>
.
4.
Set the audio detection’s sound level.
The lower the level, the smaller the sound change is detected.
M
`
The audio detection level is designed to normalize the input data to a
value between 1 and 100 and detect the signal larger than threshold
level. It is unrelated to the decibel (dB) level.
5.
Specify the activation time and activation condition.
`
For more information about <Activation time> and <Action>, refer to
Alarm input”. (page 47)
6. When done, click [Apply (
)].
M
`
Select <Video & Audio> - <Audio setup> and set the proper volume for your MIC as an audio input source, so that the
audio detection function can work properly.
`
If detected audio level is too low, set the audio input gain to a higher level in <Audio setup>.
`
You can use the audio detection function when the camera is connected with an audio input device.
Network disconnection
When the network is physically disconnected, it is considered as an event to be saved.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <Network disconnection>.
3.
Set whether or not to
<
Enable
>
.
4. Specify the activation time and activation condition.
`
For more information about <Activation time> and <Action>, refer to
Alarm input”. (page 47)
5. When done, click [Apply (
)].
App event
You can set the system to generate signals for the events defined on the application. The event signals
provided vary depending on the application function.
1. From the Setup menu, select the <Event (
)> tab.
2. Click <App event>.
3. Set whether or not to <Enable>.
4. Specify the activation time and activation condition.
`
For more information about <Activation time> and <Action>, refer to
Alarm input”. (page 47)
5. When done, click [Apply (
)].
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNV-6085R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNV-6085R in the language / languages: English as an attachment in your email.

The manual is 21,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info