621307

Samsung SNV-6085R Manual

50
Zoom out
Zoom in
Previous page
1/70
Next page
setup screen
50_ setup screen
`
Entering/Exiting
1. Set the type to <Entering/Exiting>.
2. On the screen, click four vertices to define detection area and
a popup window appears.
3. Select the desired rule:
• Entering : Detects motions of moving object whose center
point entering into the defined area, from outside of the
area.
• Exiting : Detects motions of moving object whose center
point exiting from the defined area, from inside of the area
to outside.
4. Click [OK].
5. To remove a defined rule, right click on the displayed side lines of the area to open popup context menu
and select [Delete] button.
`
Appearing (Disappearing)
1. Set the analysis type to <Appearing (Disappearing)>.
2. Select the desired event rule:
• Defined area based rules : It detects event of appearing
object that appears in the area and remaining for a certain
time period while not passing through the area borders,
and opposite case of disappearing of objects existed in the
area.
On the screen, click four vertices to define detection area.
Select the <Appearing/Disappearing> from the popup.
• Entire area based rules : It detects event of appearing
object that appears in the entire screen and remaining for
a certain time period, and opposite case of disappearing of
objects existed in the screen.
Right click on the screen to open the popup context menu
and select <Appearing/Disappearing>.
3. Click [OK].
4. To remove a defined rule, right click on the displayed side
lines of the area or on the screen to open popup context
menu and select [Delete] button.
Face detection
You can set to detect recognized face and trigger an event accordingly.
1. From the Setup menu, select the
<
Event ( )
>
tab.
2. Click <Face detection>.
3.
Set whether or not to <Enable>.
4. Select <Sensitivity> tab to set the sensitivity level.
`
As the sensitivity grows, face detection becomes more close and detailed.
5. Select the <Area> tab and select 4 vertices in the image with
your mouse to specify the detection area.
J
`
You can detect max 35 faces on the screen at the same time.
`
The minimum size of detectable face is 45x45 (horizontal x vertical)
pixels for the given max resolution. But there may be some errors
depending on the characteristics of your face or lighting.
6. To delete the specified area, click the right button of your
mouse and click [OK] in the popup window.
7. Set whether to use <Detection result overlay>.
When faces are detected, their positions and sizes are
marked with rectangles on the screen.
8. Specify the activation time and activation condition.
`
For more information about <Activation time> and <Action>, refer to
“Alarm input”. (page 47)
9. When done, click [Apply (
)].
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SNV-6085R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SNV-6085R in the language / languages: English as an attachment in your email.

The manual is 21,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info