536757
100
Zoom out
Zoom in
Previous page
1/121
Next page
Troubleshooting_ 100
Printing quality problems
If the inside of the machine is dirty or paper has been loaded improperly,
there might be a reduction in print quality. See the table below to clear the
problem.
Pages print, but
they are blank.
The toner cartridge
is defective or out of
toner.
Redistribute the toner, if
necessary.
If necessary, replace the
toner cartridge.
The file may have
blank pages.
Check the file to ensure that
it does not contain blank
pages.
Some parts, such
as the controller or
the board, may be
defective.
Contact a service
representative.
The machine
does not print
PDF file correctly.
Some parts of
graphics, text, or
illustrations are
missing.
Incompatibility
between the PDF
file and the Acrobat
products.
Printing the PDF file as an
image may enable the file to
print. Turn on Print As
Image from the Acrobat
printing options.
It will take longer to
print when you print a
PDF file as an image.
The print quality
of photos is not
good. Images are
not clear.
The resolution of
the photo is very
low.
Reduce the photo size. If
you increase the photo size
in the software application,
the resolution will be
reduced.
Before printing,
the machine
emits vapor near
the output tray.
Using damp paper
can cause vapor
during printing.
This is not a problem. Just
keep printing.
The machine
does not print
special- sized
paper, such as
billing paper.
Paper size and
paper size setting
do not match.
Set the correct paper size in
the Custom Paper Size
Settings in the Paper tab in
the Printing Preferences
(See "Opening printing
preferences" on page 53).
CONDITION
POSSIBLE
CAUSE
SUGGESTED
SOLUTIONS
CONDITION SUGGESTED SOLUTIONS
Light or faded print If a vertical white streak or faded area
appears on the page, the toner supply is low.
You may be able to temporarily extend the
toner cartridge life (See "Redistributing toner"
on page 91). If this does not improve the print
quality, install a new toner cartridge.
The
paper may not meet paper specifications;
for example, the paper may be too moist or
rough (See "Print media specifications" on
page 111).
If th
e entire page is light, the print resolution
setting is too low or the toner save mode is
on. Adjust the print resolution and turn the
toner save mode off. See the help screen of
the printer driver.
A co
mbination of faded or smeared defects
may indicate that the toner cartridge needs
cleaning (See "Cleaning the inside" on
page 88).
The
surface of the LSU part inside the
machine may be dirty (See "Cleaning the
inside" on page 88).
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Toner specks The paper may not meet specifications; for
example, the paper may be too moist or rough
(See "Print media specifications" on
page 111).
T
he transfer roller may be dirty. Clean the
inside of your machine. Contact a service
representative.
The paper path may need cleaning. Contact a
service representative.
AaBbC
AaBbC
AaBbC
AaBbC
AaBbC
Dropouts If faded areas, generally rounded, occur
randomly on the page:
A single sheet of paper may be defective.
Try reprinting the job.
Th
e moisture content of the paper is uneven
or the paper has moist spots on its surface.
Try a different brand of paper (See "Print
media specifications" on page 111).
Th
e paper lot is bad. The manufacturing
processes can cause some areas to reject
toner. Try a different kind or brand of paper.
C
hange the printer option and try again. Go
to Printing Preferences, click Paper tab,
and set type to Thick (See "Opening printing
preferences" on page 53).
If
these steps do not correct the problem,
contact a service representative.
100


Need help? Post your question in this forum.

Forumrules
1

Forum

samsung-scx-4623f

Reset search

  • Hello! I have a problem with my Samsung 4623F printer.I receive the error message "01-00-2007 [DMY]" on the display.Thank you!
    Submitted on 10-7-2022 at 09:25

    Reply Report abuse
    • I have the same problem. I suspect it is the battery, but I haven't been able to find out where the battery is in to printer. I believe it is a cr-2032 battery, but the location is a mystery.
      Answered on 3-5-2023 at 21:02

      Vote up (3) Report abuse
  • Trying to scan to PC. Goes as far as "connecting and then says not available. It is plugged into computer.
    I have turned of and on again - same result. What do I do? Submitted on 13-8-2020 at 13:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCX-4623F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCX-4623F in the language / languages: English as an attachment in your email.

The manual is 11,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SCX-4623F

Samsung SCX-4623F User Manual - French - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info