536757
98
Zoom out
Zoom in
Previous page
1/121
Next page
Troubleshooting_ 98
SOLVING OTHER PROBLEMS
The following chart lists some conditions that may occur and the
recommended solutions. Follow the suggested solutions until the problem is
corrected. If the problem persists, call for service.
Power problems
Click this link to open an animation about power problems.
Plug in the power cord and press (power)
on the control panel.
Disconnect the machine cable and reconnect
it.
- F
or Local Printing
- For Network Printing (network model
only)
Paper feeding problems
Check the maximum paper capacity of the
tray (See "Print media specifications" on
page 111).
Make sure that you are using the correct type
of paper (See "Print media specifications" on
page 111).
Remove paper from the tray and flex or fan
the paper.
Humid conditions may cause some paper to
stick together.
Remove any obstructions from inside the
machine.
Paper has not been loaded correctly. Remove
paper from the tray and reload it correctly.
There is too much paper in the tray. Remove
excess paper from the tray.
T
he paper is too thick. Use only paper that
meets the specifications required by the
machine (See "Print media specifications" on
page 111).
If an original does not feed into the machine,
the document feeder rubber pad may require
to be replaced. Contact a service
representative.
There is too much paper in the tray. Remove
excess paper from the tray. If you are printing
on special materials, use the manual tray.
An incorrect type of paper is being used. Use
only paper that meets the specifications
required by the machine (See "Print media
specifications" on page 111).
T
here may be debris inside the machine.
Open the front door and remove any debris.
If an original does not feed into the machine,
the document feeder rubber pad may need to
be replaced. Contact a service representative.
CONDITION SUGGESTED SOLUTIONS
The machine is
not receiving
power,
or the connection
cable between the
computer and the
machine is not
connected
properly.
CONDITION SUGGESTED SOLUTIONS
Paper jams during
printing.
Clear the paper jam (See "Clearing paper jams"
on page 93).
Paper sticks
together.
Multiple sheets of
paper do not feed.
Different types of paper may be stacked in the
tray. Load paper of only one type, size, and
weight.
Paper does not feed
into the machine.
The paper keeps
jamming.
Transparencies stick
together in the paper
exit.
Use only transparencies specifically designed
for laser printers. Remove each transparency as
it exits from the machine.
Envelopes skew or
fail to feed correctly.
Ensure that the paper guides are against both
sides of the envelopes.
98


Need help? Post your question in this forum.

Forumrules
1

Forum

samsung-scx-4623f

Reset search

  • Hello! I have a problem with my Samsung 4623F printer.I receive the error message "01-00-2007 [DMY]" on the display.Thank you!
    Submitted on 10-7-2022 at 09:25

    Reply Report abuse
    • I have the same problem. I suspect it is the battery, but I haven't been able to find out where the battery is in to printer. I believe it is a cr-2032 battery, but the location is a mystery.
      Answered on 3-5-2023 at 21:02

      Vote up (3) Report abuse
  • Trying to scan to PC. Goes as far as "connecting and then says not available. It is plugged into computer.
    I have turned of and on again - same result. What do I do? Submitted on 13-8-2020 at 13:00

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCX-4623F at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCX-4623F in the language / languages: English as an attachment in your email.

The manual is 11,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung SCX-4623F

Samsung SCX-4623F User Manual - French - 135 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info