621339

Samsung SCB-9051 Manual

8
Zoom out
Zoom in
Previous page
1/19
Next page
Thermal Night Vision Camera User Guide
14
Thermal Night Vision Camera User Guide
15
Interface
Attach the lens cap before storing this device.
Ensure that the storage area is kept within the allowable temperature range listed in this
device’sproductspecifications.Donotplacethisdeviceinalocationwherecondensation
may occur.
A user interface terminal block is attached to the inside of this device.
Aftermakingadjustmentstotheinternalterminalblock,ensurethatthebackcoveris
properly attached.
3.AlwayscarryoutanNUCwheneversunlightorhightemperatureobjectsarewithinthe
field of view.
4. When the camera is used continuously for a long period of time, pay attention to the
buildup of dirt on the lens. A dirty lens may result in phenomena such as shortened
detection distances.
5. Even if the same item is being monitored, changes in environmental conditions such as
rain and fog will affect detection distance. While operating the camera be aware of how
such changes may influence detection distance.
External communications cable RS485 control terminal
(+) CONNECTION TERMINAL (TRX+) 485+
(-) CONNECTION TERMINAL (TRX-) 485-
Storage
Installing the Camera
UsingRS485communications,functionsettingsmenuscanbeadjustedusingtheSamsung
TechwinDVRorSystemcontroller.
(1) Controlling menus using a PC
Using an RS485 converter, connect the camera's RS485 control terminal to a serial cable.
Example) PC serial board (COM1)

serial cable

RS485 converter

camera RS485 control
terminal
(2) Controlling menus using a DVR system controller
ConnectanRS485cable(TRX+,TRX-)toanRS485controlboardconnectionterminalcapableof
connecting to the DVR system controller.
■RS485 Communications Controls
Communications Settings Default Values (camera default values at the time of shipment)
•
Please use Samsung Techwin Protocol or Pelco-D Protocol when controlling the camera
with a separate controller.
Notes
• Leakage may occur if the back cover is not properly attached.
Notes
After thermal images appear, the camera will begin to monitor its range of coverage.
1.Donotadjustthefocusifthereisnoparticularpointoffocustomonitor.
2.Foranin-depthexplanationofthecontrolsusedwiththeSCB-9050/9051,refertothe
section detailing how the camera is operated on page 16.
Duringmonitoring,theSCB-9050/9051willcaptureheatsourcesanddisplaytheresulting
images on the monitor.
1.Ifthesubjectenvironmentexperiencesadramaticchangeintemperatureduring
monitoring,besuretosetNUCMODEtoeitheranINTERVALof10MINorless,oranAMB
of 1.0°C or lower .
2. Please be aware that because this is an infrared camera, reflections not visible to the
naked eye may still be displayed. Images reflected off glass or mirrors located in front of
the camera may become visible.
Interface
Monitoring Guidelines
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung SCB-9051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung SCB-9051 in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info