586982
38
Zoom out
Zoom in
Previous page
1/130
Next page
Network setup_ 38
3. Click the Firewall menu.
4. Turn the firewall off.
The following instructions may vary for your model.
Perform the following to configure the IP address:
1. Con
nect your machine and the computer using network cable.
2. Insert the Installation CD-ROM, and open the disk window. Open the
MAC_Ins
taller > MAC_Printer > SetIP > SetIPApplet.html.
3. Double click the file and Safari will automatically open, then select
Trust. The browser will open the SetIPApplet.html page that shows
the printer’s name and IP address information.
4. Click on the
icon (third from left) in the SetIP window to open the
TCP/IP configuration window.
5. Enter the printer’s new information into the configuration window as
follows. In a corporate intranet, you may need to have this informa-
tion assigned by a network manager before proceeding.
MAC Addres
s: Find the machine’s MAC address from the Con-
figuration Report and
enter it without the colons. For example,
00:15:99:29:51:A8 becomes 0015992951A8.
The MAC address is the hardware serial number of the
on-board network interface and can be found on the Con-
figuration Report.
IP Addres
s: Enter a new IP address for your printer.
For example, if your computer’s IP addre
ss is 192.168.1.150,
enter 192.168.1.X. (X is number between 1 and 254 other than
the computer’s address.)
Subnet Mask:
Enter a new Subnet Mask for your machine.
Default Gateway: Ent
er a new Gateway for your machine.
6. Select Apply, then OK, and OK
again. The printer will automatically
print the configuration report. Confirm that all of the settings are cor-
rect. Qu
it Safari. You
may close and eject the installation CD-ROM.
If necessary, restart the computer’s firewall. You have successfully
changed the IP address, subnet mask, and gateway.
IPv4 setting using SetIP Program (Linux)
The SetIP program should be automatically installed during the printer
driver installation.
The path and UIs may differ by Linux OS version. Refer to the
Linux OS manual to turn firewall off.
1. Print the machine’s configuration report to find your machine’s MAC
address.
2. Open the /opt/Samsung/mfp/share/utils/.
3. Double click the SetIP
Applet.html file.
4. Click to open the TCP/IP configuration window.
5. Enter the
MAC address, IP address, subnet mask, default gateway,
and then click Apply.
When you enter the MAC address, enter it without a colon(:).
6. The machine prints the network information. Confirm all of the set-
tings are correct.
7. C
lose the SetIP program.
Network parameter setting
You can also set up the various network settings through the network
administration programs such as SyncThru™ Web Admin Service and
SyncThru™ Web Service.
Restoring factory default settings using SyncThru™
Web Service
1. Start a web browser such as Internet Explorer, Safari or Firefox and
enter your machine’s new IP address in the browser window.
2. Click Go
to access th
e SyncThru™ Web Service.
3. Click Logi
n on the upper right of the SyncThru™ Web Service web-
site.
A log-in page appears.
4. Type
in the ID and Password then click Login.
If it’s your first time logging into SyncTh
ru™ Web Service, type in the
below default ID and password.
ID: admin
Password: s
ec00000
5. When the Syn
cThru™ Web Service window opens, click Settings
> Network Settings > Restore Default.
6. Click Clear for
network.
7. Turn off and restart machine to apply settings.
INSTALLING NETWORK CONNECTED
MACHINE’S DRIVER
Windows
This is recommended for most users. All components necessary for
machine operations will be installed.
Follow the steps below:
1. Make sure that the machine is connected to the network and powered
on
.
2. Insert the supplied software CD into your CD-ROM drive.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe repl
acing
“X” with the letter, which represents your
CD-ROM drive and click OK.
3. R
eview and accept the installation agreements in the installation win-
do
w. Then, click Next.
4. Select Newtork connection on the Printer Connection Type screen.
Then, click Next.
5. F
ollow the instructions in the installation window.
You can select the software applications in the Select Software to
Install Window.
Silent installation Mode (Windows only)
Silent installation mode is an installation method that does not require
any user intervention. Once you start the installation, the machine driver
and software are automatically installed on you computer. You can start
the silent installation by typing /s or /S in the command window (See
"Silent installation Mode (Windows only)" on page 32).
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung ML-551x Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung ML-551x Series in the language / languages: English as an attachment in your email.

The manual is 34,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samsung ML-551x Series

Samsung ML-551x Series User Manual - German - 137 pages

Samsung ML-551x Series User Manual - Dutch - 132 pages

Samsung ML-551x Series User Manual - French - 132 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info