You can check or change your selection of tracks at any time.
Press once if you have started listening to the selection.
Press PROGRAM/SET.
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press PROGRAM/SET.
Press PROGRAM/SET again.
Result:
The first track selected is displayed, together with the letter
CH (Change).
Press PROGRAM/SET one or more times until the track to be
changed is displayed.
If necessary, press the corresponding DISC SELECTOR (1, 2, 3) button
to change discs.
Press TUNING DOWN and UP to select a different track.
Press PROGRAM/SET to confirm your change.
Press CD ( ) to start listening to the selection.
Result:
The first track selected is played.
You can store up to:
15 FM stations
(option)
15 AM stations
15 FM stations
8 MW stations (option)
7 LW stations
15 FM stations
5 MW stations
(option)
5 SW1 stations
5 SW2 stations
Switch the system on by pressing POWER.
Select the TUNER function by pressing TUNER on the front panel or
FUNCTION on the remote control one or more times.
Select the required frequency band by pressing TUNER again on the
front panel or BAND on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
LW(OPTION) Long Wave
SW1, SW2(OPTION) Short Wave
To search for a Press PRESET/MANUAL on the front panel
station... or TUNNING MODE on the remote control
Manually One or more times until MANUAL is
displayed.
Automatically One or more times until AUTO is
displayed.
Select the station to be stored by:
Pressing PRESET MANUAL DOWN or UP on the front panel
or
Pressing TUNNING DOWN or UP on the remote control
To scroll through the frequencies faster when searching manually,
hold down the PRESET MANUAL DOWN or UP buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
Adjust the volume by:
Pressing the VOLUME or on the front panel
or
Pressing the VOL. + or – buttons on the remote control
Select the stereo or mono mode by pressing MONO/ST.
GB
11
GB
10
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press PROGRAM/SET.
Result:
The programme number and PROGRAM are displayed
for a few seconds.
b Press PRESET MANUAL DOWN and UP to assign a programme
number between 1 and 15.
c Press PROGRAM/SET to store the radio station.
Result:
PROGRAM is no longer displayed and the station is stored.
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station to
an existing programme number.
You can listen to a stored radio station as follows:
Switch the system on by pressing POWER.
Select the TUNER function by pressing TUNER on the front panel or
FUNCTION on the remote control one or more times.
Select the required frequency band by pressing TUNER BAND on the
remote control or TUNER again on the front panel.
Press the TUNING MODE button until “PRESET” is displayed.
Select the radio station as follows.
To listen to ... Press ...
Stored station TUNING DOWN and UP to select
the required programme.
Another station TUNING DOWN and UP until the
required frequency is displayed.
Press TUNING MODE again to exit the stored station selection
function.
You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing
them permanently
If reception from a specific FM radio station is poor, press
MONO/ST to switch from stereo mode to mono. The quality of
the sound will be improved.
Selecting a Stored Station
8
9
Searching for and Storing the Radio
Stations (continued)
1
2
3
4
5
Improving Radio Reception
