684544
39
Zoom out
Zoom in
Previous page
1/46
Next page
38
English
Installation
CAUTION
If you need a pipe longer than specified in piping
codes and standards, you must add refrigerant to
the pipe. Otherwise, the indoor unit may freeze.
While removing burrs, put the pipe face down to
make sure that the burrs do not get in to the pipe.
Liquid service port
<High pressure>
Gas service port
<Low pressure>
Correct
<Flare nut>
Inclined Cracked Uneven
thickness
Damaged
surface
NOTE
Excessive torque may cause gas leakage. When
extending the pipe with welding or brazing,
ensure that nitrogen is used during the welding or
brazing process. The joint must be accessible and
serviceable.
CAUTION
Tighten the flare nut at the specified torque. If the
flare nut is over-tightened, it may break to cause
leakage of refrigerant gas.
Step 2.10 Fixing the installation plate
You can install the indoor unit on a wall, window frame,
or gypsum board.
WARNING
Make sure that the wall, window frame, or gypsum
board can withstand the weight of the indoor unit. If
you install the indoor unit in a place where it is not
strong enough to withstand the unit's weight, the
unit could fall and cause injury.
When fixing the indoor unit on a wall
Fix the installation plate to the wall giving attention to
the weight of the indoor unit.
B
A
D
C
Plastic anchor
Wall
20 mm
NOTE
If you mount the plate to a concrete wall using
plastic anchors, make sure that gaps between the
wall and the plate, created by projected anchor, is
less than 20 mm.
When fixing the indoor unit on a window frame
1. Determine the positions of the wooden uprights
to be attached to the window frame.
2. Attach the wooden uprights to the window frame
giving attention to the weight of the indoor unit.
3. Attach the installation plate to the wooden
upright using tapping screws.
(Unit : mm)
Model A B C D
✴✴09✴✴LN/RC 36 60 65 36
✴✴09✴✴PF/SG
✴✴12✴✴
36 120 81 36
✴✴18✴✴LN/RC 36 190 81 36
✴✴18✴✴PF/SG
✴✴24✴✴
33 110 110 33
Pipe bundle hole: Ø 65 mm
DB68-06031A-01_A5.indd 38 4/18/2017 9:00:00 AM
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samsung AR12KPFNDWK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samsung AR12KPFNDWK in the language / languages: English as an attachment in your email.

The manual is 21,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info