629822
9
Zoom out
Zoom in
Previous page
1/20
Next page
5
Designing an Installation Plan
If you are a professional installer, you’ll probably want
to skip over this section, however if you are setting
up your system for the first time, this section can help
make your installation a little bit easier.
Before you start plugging, stripping and connecting
wires, it is a good idea to have a clear installation plan.
To create your installation plan, you need to consider
several design parameters including what sound
sources will be used, if announcement paging in nec-
essary, which rooms need to have sound, if a remote
paging mic is required, which type of speakers will do
the best job for the room they are covering, and your
wiring plan.
Selecting the Sound Sources
If you are using multiple sound sources, you'll need
some type of mixer and for fixed installations, a zone
mixer like the Samson ZM series is ideal. The ZM series
provides six input channels with the ability to con-
nect up to six input sources. On input Channel’s 1 and
2 there is an input for connecting microphones with
phantom power to operate condenser type mics. The
ZM series also has a special priority feature so when
you speak on the microphone, the music is automati-
cally muted. You can connect line level signals on four
input channels, so signals from TAPE, CD, DVD or Ka-
raoke players, Audio/Video TV monitors, Radio Tuners,
DJ mixers or any other line level device can be used as
a sound source. You may also be able to connect the
output from a Home Hi-fi receiver if its equipped with
a line level output.
Creating the Audio Zones
You can create separate audio environments using up
to five ZM seriess outputs, each connected to an input
channel on the ZM75 or ZM125 amplifier. You can
connect one or more speakers with a total load imped-
ance of 4 ohms or more to each output of the ZM Se-
ries amplifier. Obviously, (or perhaps not so obviously)
we call an output a zone on the ZM series, but a zone
is also the area where you want to have sound. So,
think about where you want to distribute the sound.
The ZM series can accomplish all of this easily. In ad-
dition, the ZM series lets you easily connect a remote
microphone for paging.
Designing an Installation Plan
1
2
3
4
5
6
7
8
9
*
0
#
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson ZM125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson ZM125 in the language / languages: English as an attachment in your email.

The manual is 2,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Samson ZM125

Samson ZM125 User Manual - French - 22 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info