629650
11
Zoom out
Zoom in
Previous page
1/19
Next page
SM10
Owner's Manual
7
Input and Output Connections
21
3
4
5
6
7
8
9
11
12
13
10
14 15
1617
18
19
20
21
2223
2425
21
3
4
5
6
7
8
9
11
12
13
10
14 15
1617
18
19
20
21
2223
2425
16. Mic/Line Inputs (chan-
nels 1 and 2) - Use these
Combo XLR plus 1/4-
inch jacks to connect a
microphone or line level
signal to channels 1 and
2. The XLR inputs provide
48-volt phantom power
for use with condenser
microphones.
17. Line Inputs - Use these balanced 1/4” jacks to connect line level sources
such as synthesizers, drum machines, MP3 players, or eects processors
to any of the 8 channels. When connecting monophonic (as opposed
to stereo) signal sources, use the left inputs; the Balance control for that
channel will then act as a constant level pan control.
18. Input Level Switch – Use this switch to independently set the sensitivity
of channels 1-8 line level inputs. When the switch is in the up position the
input are set to +4dBu. When the switch is depressed the input is set to
-10dBv.
19. Stereo LINE IN (channels 9-10) – Two stereo 1/4-inch
jacks for connecting stereo line level sources like those
from the outputs of eects processors. These inputs can
also be used to link multiple SM10’s or to add the output
from another mixer to the SM10 without taking up chan-
nel line inputs.
20. MON Output – The signals present at the MON stereo
1/4-inch output are sent from the MON send, which are
fed from the input channels MON control knobs. In a
live sound situation this can be used to create a monitor
mix by connecting the MON output to a power amp and
monitor speaker.
21. EFX Output – The stereo 1/4-inch EFX Output is used to send a signal to
an external signal processor such as a delay or reverb. The signal present
at the EFX Output is sent from the EFX bus, which is fed from the input
channel’s EFX control knob.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson SM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson SM10 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info