629650

Samson SM10 Manual

9
Zoom out
Zoom in
Previous page
1/19
Next page
SM10
Owner's Manual
5
4. EFX (Eects) Send – The EFX send knob allows you to route the signal
to the EFX outputs. The EFX send is post-fader so the level of the signal is
determined by the position of the channel Volume control. These sends
are usually used to route signal to outboard eects devices. When the EFX
send knob is at the 12 o’clock center detent position, the signal is routed
with unity.
5. MUTE/CLIP/MIX B – This switch will ash RED when the channel input sig-
nal peaks. To reduce distortion, turn the Volume control counterclockwise
until the clip indicator does not light during normal use. When the switch
is depressed the channel’s signal path is interrupted to the main mix and
the channel is assigned to the MIX B bus.
6. LINE IN VOLUME – The SM10 features two additional stereo
Line Inputs (channels 9 and 10) which can be used to return
the outputs of the an external eects processor, or to con-
nect the output of any stereo line level device to the main
mix.
7. MON Send – The MON signals (see #3) from input channels
1-8 are mixed together and sent to the MON Outputs. Use
the MON send control to set the amount of signal being
sent to the MON Output.
8. EFX SEND – The EFX signals (see #4) from input channels
1-8 are mixed together and sent to the EFX Output. Use the
EFX level controls to set the amount of signal being sent to
EFX Output.
9. MAIN OUTPUT LEVEL – This
knob determines the nal
output signal level. Signals
from all channels are routed
here just before leaving the
SM10 via its left and right Main
Output jacks. The 12 o’clock
center detent position of the
control indicates unity gain (no
level attenuation or boost).
10. SOURCE Select Switch – The Source select Switch allows you to congure
the Output Meter (see #11) and Headphone output (see #15) to monitor
the MON, EFX, MIX B and Main Output buses.
21
3
4
5
6
7
8
9
11
12
13
10
14 15
1617
18
19
20
21
2223
2425
21
3
4
5
6
7
8
9
11
12
13
10
14 15
1617
18
19
20
21
2223
2425
Controls and Functions
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson SM10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson SM10 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info