629739
8
Zoom out
Zoom in
Previous page
1/16
Next page
6
Quick Set-Up
In the following pages of this manual, you will find a detailed explanation of system set-ups, but if you just
want to get started quickly, you can follow the diagram and steps below to set up a basic stereo PA system.
NOTE: Before plugging in and turning on, it is important to remember the Golden Rule of audio … " LAST
ON, FIRST OFF". Translated, this means that when turning on your system, you should always turn your power
amplifiers or powered monitors on LAST, and when turning your system off, turn your power amps off FIRST.
This helps avoid any loud pops caused by inrush current at power up, which can sometimes damage loud-
speakers.
1. Before connecting your Resound HD’s, make sure that the power of all your systems components are
turned off. Also, make sure that your power amplifier volume controls and the main left and right fad-
ers of your mixer are turned all the way down.
2. Connect the cables to your microphones and instruments, or a CD player, to your mixer.
3. Switch on the power of the mixer, instruments and/or CD player, and then switch on your power
amplifier.
4. While speaking into the mic (or playing the instrument or CD), raise the mixers main Left and Right
faders to the "0" position. Be sure that the mixers output meters are not clipping. If they are, adjust
the mixer volumes down until the signal cleans up.
5. Now, slowly raise your power amp controls until you reach the desired listening level.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson RS10mHD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson RS10mHD in the language / languages: English as an attachment in your email.

The manual is 1,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info