Manual Samson Q2U (page 16 of 24) (English)

629734

Zoom out

Zoom in

1/24

Q2U Quick Start - continued

4. Plug the mini-B size (small) end of the included USB cable into the USB socket also

located on the bottom side of the Q2U.

5. Now, plug the other end of the USB cable into an available USB port on your computer.

Note: Be sure to check the installation guide for Windows and Mac OS to confirm your

computer has recognized the Q2U. Also, make sure your computer’s output level is set to

maximum for full volume in the Q2U headphone monitor.

6. Next, launch your DAW, turn down the main output level and select the Q2U for the

input and outputs.

7. Set up a mono record track in your DAW for the vocal track.

8. At this point you want to set the level of the Q2U and there are few ways to do this

depending on your exact computer set up. You can set the microphone’s input level in the

Sound playback in Windows or in the Sound dialog box in the System Preferences if you

are using the MAC OS.

9. Set level of the microphone by raising the Input level control in your DAW or system to

about half way up. If you see the Power/Peak LED light red, your signal will be distorted.

Turn the MIC level control down until it does not flash red.

10. Next, put on your HP20 headphones, speak or sing into the mic and then raise the

DAW’s output level control until you reach a comfortable listening level.

Now, follow the instructions of your DAW software to enable the track for recording and

you’re ready to record.

Using The XLR Output

You can connect the Q2U to a standard PA mixer for live sound applications using the

XLR output. Most PA mixers feature microphone inputs on XLR, so just connect the

included XLR cable to your mixer, set the ON/OFF switch to “ON” and follow the mixer

manufacturer’s instructions for setting the mic level.

Operating the Q2U

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson Q2U in the language / languages: English as an attachment in your email.

The manual is 6,48 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson Q2U Manual

Product: