24759
10
Zoom out
Zoom in
Previous page
1/76
Next page
8
ENGLISH
2TK LEVEL
The 2TK LEVELcontrol is used to adjust the amount of signal that is sent from the 2T IN jacks to the main L/R Mix
bus. For more information see the following section "Mixing a 2-track with the Stereo MIX".
HDM
The HDM switch enables the HARD DISK MODE and is used
to interface with a computer based, hard disk recorder. When
turned on, the channel RECORD switches are activated for
special bussing and monitoring features. For more informa
-
tion on using HDM, see the section "Using the HDM" on page
14 of this manual.
Mixing a 2-track with the Stereo Mix
You can mix the 2T IN with the input faders using the Hard Disk Mode.
To do this follow these simple steps.
Connect the 2-track device to the 2T IN input connectors and
any mic or line inputs to channels 1-8.
In this mode the C/ROOM+PHONES control will act as your
master volume, so for now, turn that all the way down.
Connect the CR LEFT and RIGHT outputs to your power
amp or powered speakers.
Press the HDM switch in the master section so that the yellow
LED is illuminated.
Now raise the C/ROOM+PHONES level control up to a bit
under 5.
Raise the MASTER FADERS to “O” so you can hear the mix from
the input channels 1 – 8.
Now, raise the channel faders and 2TK LEVEL control until you have the mix you want.
Adjust the C/ROOM+PHONES level control to set the desired final level.
9
Controls and Functions
2 TRACK INPUT AND OUTPUT
The MDR6’s 2 Track section provides the connections for playback and recording for an external device such as
a DAT, cassette recorder, CD or Mini Disk. -The signal from a device connected to the 2T IN is heard only in the
CONTROL ROOM and HEADPHONE outputs.
MASTER SECTION
Auxiliary Return
The MDR6 has a stereo auxiliary return, which can be accessed via the pair of 1/4-inch phone jacks located on the top
panel. The Auxiliary Return can be used to connect any stereo line level signal, but they are primarily used to connect the
output of external effects processors.
AUX RET
This adjusts the amount of signal that is coming from the AUX RET jacks to the MAIN bus.
10
11















   
 



































11
9
10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR6 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 15,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info