24757
15
Zoom out
Zoom in
Previous page
1/32
Next page
AUX RETURN 1
This adjusts the amount of signal that is sent from the AUX RET 1 jacks to the MAIN bus.
SOLO Switch (AUX RETURN 1)
You can listen to the AUX RETURN 1 in the SOLO bus
by pressing the SOLO switch located directly under
the AUX RETURN 1 control knob. When engaged, the
yellow LED illuminates indicating the AUX RETURN
1 is assigned to the SOLO bus. The SOLO switch
activates a logic control switch. Pressing the switch
repeatedly will assign the input channel on or off the
SOLO bus. You can use the SOLO LEVEL control to
adjust the overall volume to the SOLO Bus.
AUX RETURN 2
The AUX RETURN 2 adjusts the level of the sig-
nal present at the AUX RET 2 jacks. This signal is
summed, or mixed in to the main L/R MIX bus. When
using the onboard digital effects, the AUX RETURN
2 control is used to control the output level of the
internal DSP effects processor which is also summed with the main L/R MIX bus.
SOLO Switch (AUX RETURN 2)
You can listen to the AUX RETURN 2 in the SOLO bus by pressing the SOLO switch located directly under the AUX
RETURN 2 control knobs. When engaged, the yellow LED illuminates indicating the Aux RETURN is assigned to the
SOLO bus. The SOLO switch activates a logic control switch. Pressing the switch repeatedly will assign the input
channel on or off the SOLO bus. You can use the SOLO LEVEL control to adjust the overall volume to the SOLO Bus.
MASTER OUTPUT SECTION
MONO OUT
The MDR16 features a mono output that sends the combined signal from
the main Left and Right Main Mix to the MONO OUT jack. You can use the
MONO OUT to send signal to a subwoofer or in an installation to another
room or sound zone. Use the MONO OUT control knob to adjust the
level of the combined main left and right mix mono signal sending to the
MONO OUT jack.
15
MASTER SECTION (continued)
36
37
38
13
39

























Auxiliary Returns
The MDR16 has two stereo auxiliary returns, which can be accessed via the two pairs of 1/4-inch phone jacks located on
the top panel. The auxiliary returns can be used to connect any stereo line level signal, but they are primarily used to con-
nect the output of external effects processors. The MDR16’s onboard effects are internally connected to the Aux RET2.
Controls and Functions
















































40
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson MDR16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson MDR16 in the language / languages: English as an attachment in your email.

The manual is 12,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info