624006
18
Zoom out
Zoom in
Previous page
1/28
Next page
14
14 - GROUP OUT - XLR 1/4" jacks
In a live sound application, you can connect
additional zone speaker systems using GROUP OUT
outputs connected to a power amplifier or powered
speakers. The signal at the GROUP OUT jacks follows
the GROUP volume fader.TRS phone jack connector
pin-out - Sleeve: Ground, Tip: Hot (+), Ring: Cold (-)
15 - GROUP INSERT - 1/4-inch Send and Return
jack
Send and return patch point on TRS (TIP/RING/
SLEEVE) jack for interfacing external effects
processors on GROUP bus outputs. The signal is sent
on the tip (the Send) and returns (the Return) on the
ring of the connector.
16 – AUX RETURNS
The L2400 and L3200 have two pairs of 1/4-inch
jacks for connecting stereo line level sources like
those from the outputs of effects processors. The
LINE inputs have a nominal operating level of -
40dBV through - 10dBV. TRS phone jack connector
pin-out - Sleeve: Ground, Tip: Hot (+), Ring: Cold (-)
17 - AUX OUT (1 and 2) - 1/4-inch jacks
The signal present at the AUX 1and Aux 2 outputs
are sent from the AUX 1 and AUX 2 bus, which is
fed from the AUX 1 and AUX 2 control knobs on the
input channels. The AUX 1 and AUX 2 are normally
used as a MONITOR MIX bus in a live sound situation
by connecting the output to a power amp and
monitor speaker. TR phone jack connector pin-out
- Sleeve: Ground, Tip: Hot (+).
18 - CD/TAPE Inputs - RCA jacks
The L Series mixers feature a stereo line level input
on RCA connectors for connecting the output of
devices such as MP3, CD, computer soundcard,
cassette player, or any other line level device.
19 - Record Out - RCA jacks
The signal present at this connector is the MAIN bus
signal before it has passed through the MASTER
level control and graphic equalizer. The nominal
output level is -10dBV and the impedance is 100
Ohms.\
20 - EFX OUT 1 -2 - 1/4-inch jack
The EFX OUT 1 -2 output is used to send a signal
to an external signal processor such as a delay
or reverb. The signal present at the EFX OUT 1 -
2 output is sent from the EFX OUT 1 -2/EFX 1- 2
bus, which is fed from the EFX OUT 1 -2 /EFX 1- 2
bus send on the input channels. TRS phone jack
connector pin-out - Sleeve: Ground, Tip: Hot (+),
Ring: Cold (-)
21 – USB PORT Connect standard standard USB
cable here.
22– PHONES - 1/4-inch jack (front Panel)
Connect standard stereo headphone, 60 to 600
Ohms, here.
23 - USB BUS POWER – socket
Plug any USB bus powered lamp here.
L2400 and L3200 Input and Output Connections
CD/TAPE
IN
REC
OUT
1 2
3 4
5 6
1 2
AUX SEND
EFX OUT
AUX RETURN1 2
16
17
20
19
18
USB
21
PHONES
22
23
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L2400 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info