624006

Samson L2400 Manual

16
Zoom out
Zoom in
Previous page
1/28
Next page
12
L2400 and L3200 Input and Output Connections
CHANNEL - MONO MIC/LINE INPUTS
The L Series mixers offer plenty of mono mic/line
and stereo line input channels, sixteen on the L2400
and twenty four on the L3200’s, for connecting a
variety of signal sources from microphones to line
level devices such as synthesizers, drum machines
and direct boxes. The mono mic/line inputs each
have a LINE level, Hi-Z (High Impedance) input, a
MIC level, Low-Z (Low Impedance) input; and an
Insert connector for effects. Both LINE and MIC
inputs are balanced, with MIC inputs compatible
with microphones of output impedance 50-600
Ohms and LINE inputs compatible with line level
devices of 600 Ohms. Following is a description of
the Mic/Line input connectors:
1 – INSERT - Send and Return jack
The L2400 and L3200 have a 1/4-inch, TRS (TIP/
RING/SLEEVE) Insert jack for connecting outboard
effects processors directly on the channel input. The
signal is sent on the tip (the Send) and returns on
the ring (the Return) of the connector.
2 – LINE - Line Level Input
Use these inputs to connect high impedance micro-
phones, synthesizers and drum machines. The LINE
inputs have a nominal operating level of -40dBV
through - 10dBV. TRS phone jack connector pin-out
- Sleeve: Ground, Tip: Hot (+), Ring: Cold (-)
NOTE: It is not possible to simultaneously use both
the LINE and MIC inputs on the same channel. For
each channel, use only one of the inputs as appro-
priate for the input source.
3 - MIC - Microphone Input
Use these inputs to connect Low Impedance micro-
phones and low-level signals from direct boxes.
The MIC inputs have a nominal operating level of
–50dBV through -20dBV. The MIC inputs also feature
+48V phantom power, allowing you to use condens-
er microphones. The Phantom Power is switched
LINE
INSERT
1
MIC
1
2
3
on/off simultaneously for channels 1 through 20(28).
XLR connector pin-out - Pin 1: Ground, Pin 2: Hot (+),
Pin 3: Cold (-)
Stereo Input Channels - 1/4-inch and XLR
Each of the L Series mixers has four stereo line level
input channels for connecting stereo signals like
those from CD or MP3 players, electronic keyboards,
drum machines and other line level signals. The first
two stereo inputs also include an extra mic pream-
plifier. Use these for connecting stereo signals like
those from CD or MP3 players, electronic keyboards,
drum machines and other line level signals. The
remaining stereo inputs have both 1/4-inch and RCA
connectors for connecting your gear. Following is a
description of the Mic/Line input connectors:
4 - Stereo Inputs - 1/4-inch jacks
The L2400 and L3200 have two pairs of 1/4-inch
jacks for connecting stereo line level sources. For
stereo inputs use the LINE L to connect the left chan-
nel and the LINE R to connect the right channel.
Use these inputs to connect high impedance micro-
phones, synthesizers and drum machines. The LINE
inputs have a nominal operating level of -40dBV
through - 10dBV. TRS phone jack connector pin-out
- Sleeve: Ground, Tip: Hot (+), Ring: Cold (-)
5 - XLR mic input
Use these inputs to connect Low Impedance micro-
phones and low-level signals from direct boxes.
The MIC inputs have a nominal operating level of
–50dBV through -20dBV. The MIC inputs also feature
+48V phantom power, allowing you to use condens-
er microphones. The Phantom Power is switched
on/off simultaneously for channels 1 through 20(28).
XLR connector pin-out - Pin 1: Ground, Pin 2: Hot (+),
Pin 3: Cold (-)
LINE 20
LINE 19
19/20
MIC
5
4
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson L2400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson L2400 in the language / languages: English as an attachment in your email.

The manual is 5,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info