630030

Samson Graphite 49 Manual

20
Zoom out
Zoom in
Previous page
1/164
Next page
20
Zones
The keyboard can be divided into four zones, sometimes referred to as layers or splits. Each zone
has its own active key range, program number, MSB, LSB, Channel, Port, Octave, and Transpose
settings. The zones can be separated or overlapped. This allows you to layer or split the keyboard
between sounds to expand your performance. Zone 1 is always active. Zone 2–4 can be activated
or disabled in Zone Mode. The display shows the parameters of the selected zone. The factory
default is Zone 1.
Press the ZONE button to enter Zone Mode. The corresponding indicator will light up. Press the
PAGE button to select a zone. The On/O status appear after the zone number. Press the DATA+
button to engage the zone, and DATA– button to disable the zone. When a zone is activated,
the zone number will appear under the Zone tag in the third row of the display. For each zone
(1–4), the factory default MIDI Out port is 1–4, respectively. Press the MAIN button to return to
Performance Mode.
If zones are activated and overlapped, keys played in the overlap section will send messages to
multiple outputs and more than one voice can be produced. The PITCH BEND wheel, MODULA-
TION wheel, pedal and keyboard aftertouch are applied to all activated zones.
Note: In Performance Mode, the operation of the OCTAVE +/– and TRANSPOSE +/– buttons only aect
Zone 1, even if multiple zones are activated.
Editing Zones
After selecting a zone, press the ENTER button to edit the zone. Press the PAGE ◀ / ▶ buttons to
cycle through the available parameters. Use the DATA +/– buttons or numerical keys to change
the value of the parameter. Press both DATA +/– buttons simultaneously to return to the original
value. When you have completed editing the zones, press the ENTER button or the ENTER key on
the keyboard to save your changes.
Zone settings are nonvolatile, and will be saved even when the power is turned o. You can re-
cover the default Zone settings with the PRESET function. Press the MAIN or ZONE button to exit
Zone Mode and return to Performance Mode. To cancel your changes, before pressing Enter, press
the MAIN or ZONE button to return to Performance Mode.
Note: Zones are saved to the current active Preset.
Note: In Performance Mode, changing the program number, MSB, LSB, Port and Channel only aect
Zone 1. Enter Zone Mode to adjust the parameters of the other active zones.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson Graphite 49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite 49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info