Manual Samson Graphite 49 (page 19 of 164) (English, German, French, Italian, Spanish)

630030

Zoom out

Zoom in

1/164

Graphite 49 · USB/MIDI Keyboard Controller

ENGLISH

FRANÇAISDEUTSCHEESPAÑOLITALIANO

Selecting Velocity Curve for the Trigger Pads

Press the P.Curve key to select a velocity curve for the trigger pads. “P.Curve” will appear in the Op-

eration area of the display with its current velocity curve number in the data area. The Operation

area will then change to show the current velocity curve. The number will also blink under the

“Pad Vel” tag on the second row of the display. Use the DATA +/– buttons or enter the number by

pressing the numerical keys on the keyboard. Press the ENTER key or the ENTER button to conrm

your setting and to save it. The name of the velocity curve will be updated, and the value display

will stop blinking. Selectable curves are the same as keyboard velocity curves.

Switch the Local Control

The USB out from port 1 or 2 can be transmitted through the MIDI Out jack. This is controlled by

the Local setting. Press the Local key to switch the local control on or o. “Local” and its current

status will appear in the Operation area of the display and ash. Press the DATA+ button (or nu-

merical key 1) to turn Local Control on. Press the DATA– button (or numerical key 0) to turn Local

Control o. Press the ENTER key or the ENTER button to conrm your setting and to save it.

Reverse Slider Direction

Sliders can be reversed to be used as drawbars. Press the Drawbar key to switch the drawbar

feature on or o. “Drawb” and its current status will appear in the Operation area of the display

and ash. The default setting is O. Press the DATA+ button (or numerical key 1) to turn Drawbar

on. Press the DATA– button (or numerical key 0) to turn Drawbar o. Press the ENTER key or the

ENTER button to conrm your setting and save it in the current preset.

Pedal Setup

Press the pedal to assign a control code to the pedal. “Pedal” will appear in the Operation area

of the display with the value of the current control in the data area. The value is also shown and

blink under the “Val” tag on the second row of the display. Use the DATA +/– buttons to change

the value or enter the data by pressing the numerical keys on the keyboard. Press the ENTER key

or the ENTER button to conrm your setting and to save it. When you save your setting, the value

display will stop blinking.

Preset Reset

Press the PRESET key to reset the unit to the factory default setting. “Reset No” will appear in the

Operation area of the display and “No” will blink. Press the DATA+ button (or numerical key 1) to

switch it to “Yes” or DATA– button (or numerical key 0) to switch it to “No.” Press the ENTER key or

the ENTER button to conrm your selection. When “Yes” is conrmed, “Reset” will appear in the

Status Indicator area in the right side of the screen and “Loading…” will appear in the Operation

area of the display. After the reset is complete, the display will show “Reset OK”.

Setup Mode

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson Graphite 49 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 8,08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson Graphite 49 Manual

Product: