Manual Samson Expedition Pro XP 200 (page 11 of 60) (English, German, French, Spanish)

629790

Zoom out

Zoom in

1/60

Expedition Pro XP300

Guided Tour

1: Equalizer - These controls allow you to shape your sound by boosting or cutting

the amount of bass (at 100 Hz) or treble (at 10 kHz) by up to 15 dB. A center detent

in each knob indicates no boost or cut (that is, flat response). As each knob is turned

clockwise from the 12 o’clock position, the bass or treble is boosted; as it is turned

counterclockwise from the 12 o’clock position, the bass or treble is reduced.

2: Reverb send - These knobs determine how much signal is being sent from the

channel to the onboard DSP effects processor. As you move the knob clockwise from

0 to 10, more signal is sent. To hear the effect, one of the six presets must be selected

using the DSP Effects control (see #10 on the next page). Be careful not to send too

much signal to the DSP, or a distorted sound will result.

3: Pan/Balance control - In channels 1 and 2, this knob acts as a Pan control, allow

ing you to place the signal anywhere in the left-right stereo spectrum, while keeping

the overall signal level constant. When the knob is placed at its center (detented)

position, the signal is sent equally to both the left and right outputs. To route a signal

hard left or right, place the pan knob either fully counterclockwise or fully clockwise.

In channel 3/4 (the stereo channel), this knob acts as a Balance control, allowing you

to alter the relative levels of the two input signals. When the knob is placed at its cen

ter detented position, both signals are at equal strength. When moved left of center,

you’ll hear more of the left input signal; when moved right of center, you’ll hear more

right input signal.

4: Channel volume control - This knob determines the level of the channel In

stereo channel 3/4, this knob simultaneously controls the level of both inputs (the

relative levels of the two can be adjusted with the Balance knob, as described in #3

above). In practice, you’ll use the channel volume controls to continuously adjust the

levels of the various signals being blended together by the XP300 mixer.

5: Insert (sub) connector - This 1/4" connector brings line-level signal in directly

before the XP300 power amplifiers. It is normally used to return signal from an

optional EX500 subwoofer.

REVERB

ENGLISH

I' am trying to find a service manual for the xp200 without success. I have two units that were not plugged for two years and will no take a charge. How do I replace the batter? It looks like the case comes apart by removing the screws around the outer perimeter ,one at the top and two underneath at the bottom. Are there any special precautions when separating the front from the main body? Submitted on 13-9-2022 at 01:36
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Samson Expedition Pro XP 200 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 10,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Samson Expedition Pro XP 200 Manual

Product: