630067
7
Zoom out
Zoom in
Previous page
1/40
Next page
7
ENGLISH
Guided Tour - HT4 Handheld Microphone Transmitter
1: Audio on-off switch - When set to the On position, audio signal is transmitted. When set to the
Off position, the audio signal is muted. The advanced circuitry in the Concert IV system ensures that
no pop or thud will be heard during muting. Note that turning this off does not turn off the transmitter
powerit is simply a way to temporarily mute the transmission of audio signal. If you dont plan on using
the transmitter for extended periods, turn off the transmitter power by using the power on-off switch (see
#3 below).
2: Battery LED - This LED is an indicator of battery strength. When the HT4 is first powered on, this
LED will light for about two-tenths of a second (if the battery is sufficiently strong), and will then go off.
When battery voltage is low, this LED lights steadily, indicating that the battery needs to be replaced.
3: Power on-off switch - Use this to turn the HT4 on or off (to conserve battery power, be sure to leave
it off when not in use). WARNING: Be sure to mute the audio signal at your external mixer or amplifier
before turning transmitter power on or off, or an audible pop may result.
4: Mic level control (trimpot) - Determines the overall output level of the HT4. Use the supplied plastic
screwdriver to set this to the optimum microphone output level. See the Setting Up and Using the
Concert IV System section on page 6 in this manual for more information.
5: Battery holder - Insert a standard alkaline 9-volt battery here, being sure to observe the plus and
minus polarity markings shown. We recommend the Duracell MN 1604 type battery. Although
rechargeable Ni-Cad batteries can be used, we do not recommend them as they do not supply adequate
current for more than two hours.
WARNING: Do not insert the battery backwards; doing so can cause
severe damage to the HT4 and will void your warranty.
SAMSON
POWER LEVEL
OFF ON
MIN MAX
E
0
1
3
5
4
Audio
OnOff
Batt
SAMSON
Model HT4
Ch 11
1
2
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Samson CR4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Samson CR4 in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info