Manual Salora FT-410 (page 9 of 20) (English, German, Dutch, French)

748390

Zoom out

Zoom in

1/20

• Raise all locking clips of the front fan guard (Fig.3)

• Now place the front fan guard in place against the outer ring and

put all the clips downwards again. Now fix the two fan guards

together using the bolt and nut (Fig.4).

OPERATION OF THE DESK FAN

ATTENTION:

• Choose a suitable location for the fan. Always choose a location that

meets the safety requirements stated in this manual.

• When placing the fan on a table or board, always check that the cord

cannot be pulled accidentally or that the appliance can fall over.

• Never hang the fan on a wall or ceiling.

• Remove the cable tie and unwind the cable completely before using

the fan.

• Loosen the neck screw to set the desired wind direction angle by

pushing the motor and fan blade up or down to the desired position

(Fig. 5). Then tighten the screw.

• To disable the oscillation function, which causes the fan to only blow in

one direction, pull the oscillating knob upwards. To re-activate this

function, push the oscillating knob downwards again (Fig.5).

1. Switch on / off and control speed

The device can be switched on and off and the speed can be controlled

by means of the speed switch. You can choose from the following

modes:

0 The fan is off

1 The fan is at the lowest setting

2 The fan is at the middle setting

3 The fan is at the highest setting

2. Adjust angle direction

Switch off the fan. Slightly loosen the neck screw by turning it counter-

clockwise. Adjust the fan in the desired angular direction and tighten

the neck screw again by turning it clockwise.

CLEANING AND MAINTENANCE

• Switch off the fan and unplug it from the power supply before

assembling, disassembling or cleaning the fan.

Oscillation knob

Neck screw for adjusting wind

direction angle

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Salora FT-410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Salora FT-410 Manual

Product: