748390

Salora FT-410 Manual

8
Zoom out
Zoom in
Previous page
1/20
Next page
Product overview
1.
Front fan guard
8.
Motor housing
2.
Fan blade cap
9.
Neck with screw
3.
Fan blade
10.
Speed settings
4.
Plastic mounting nut
11.
Base insert
5.
Rear fan guard
12.
Mounting screw
6.
motor shaft
13.
Base
7.
Oscillation knob
Product assembly
BASE ASSEMBLY
• Place the insert of the base on a flat,
stable and dry surface.
• Attach the neck of the fan to the base and mount it on the insert of
the base by means of the screws. Then place the fan blade over the
motor shaft.
• This fan is equipped with an insert, which must be mounted on the
base before you use the fan.
• With this insert the fixing screws are included (these are in a plastic
bag, attached to the bottom of the insert).
• Remove the plastic bag with the screws and snap the base of the
fan into the insert. Make sure that the base is securely clicked onto
the insert. Now fix the two parts together firmly using the screws
supplied, into the holes at the bottom of the base. Be careful not to
over tighten the screws.
ASSEMBLY OF THE FAN BLADE AND GUARD GRILLS
• To assemble the fan guard and the fan blade, you must first remove
the cover cap by turning it clockwise. Then loosen the mounting
nut from the motor by turning it counter clockwise.
• Place the rear fan guard against the motor housing in place. Ensure
that the cavities of the fan guard fit into the pins of the motor
(Fig.1). If the fan guard is mounted correctly, the handle will be at
the top.
• Now attach the rear fan guard by tightening the mounting nut
firmly by hand (Fig.1), taking care not to force the nut.
• The slot in the fan blade fits into the T-pin of the motor shaft for
correct positioning of the fan blade.
• Attach the fan blade by carefully tightening the fan blade cap by
hand, anti-clockwise, on the motor shaft (Fig.2). Note, the cap will
tighten automatically, do not force it.
Fig.1 Fixing nut and pins
Fig.2 Tighten the cover cap
counter clockwise
Mounting nut
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Salora FT-410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Salora FT-410 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info