424291
18
Zoom out
Zoom in
Previous page
1/44
Next page
18 Sagem · SPFX 43 · 47 · SP 4840
EN
1 Press b.
2 Using [ select
ACCESS CODE.
3 Confirm with OK.
4 Enter a four-digit code.
5 Confirm with OK.
Forwarding Messages
Forwarding Messages
The device forwards messages to a specified telephone
number. Once the configured number of messages is
reached, the device calls the number. If the call is answered,
a greeting text is played. Then the person on the line must
enter the access code. If no code is entered or an incorrect
code is entered three times, the device hangs up.
1 Press b.
2 Using [ select
FORWARDING.
3 Confirm with OK.
4 Use [ to select whether you would like to switch for-
warding on or off.
5 Confirm with OK.
6 Enter the number to which the received messages
should be forwarded.
7 Confirm with OK.
8 Use [ to select how many messages should be col-
lected and forwarded together.
9 Confirm with OK.
10 Recording a new outgoing message: Press OK
to record an outgoing message. Wait for the confirma-
tion tone before you say your text.
11 Press OK to end the recording. The recording is played
back.
Using Remote Access
Remote Control
You can hear and delete new messages, record a new out-
going message or switch answering machine on or off with
a telephone call.
Tone Dialling
1 Call your number.
2 Wait, until the answering machine switches on and
plays the outgoing message.
3 Enter the access code.
4 The device interrupts the outgoing message and plays
new messages. If no new messages have been received,
you will hear two confirmation tones.
5 The functions listed below are available using the
numeric keys.
6 Hang up to end the remote access.
Remote Control Functions
Aborting Current Function
Listening to Messages
Hearing Current Message Again: Press .
Listening to All Messages: Press ƒ.
Listening to Next Message: Press .
Deleting Messages
To Delete the Current Message: Press while lis-
tening to the message.
Deleting All Messages: Press after listening to all
the messages.
Notice
Access Function
You can also call the function by pressing
OK, 79 and OK.
CAUTION!
No Identically PIN Codes!
The access code may not be identical to the
VIP code.
Notice
Access Function
You can also call the function by pressing
OK, 77 and OK.
Notice
Overwriting Existing Outgoing Mes-
sage
When you record a message, you are asked, if
you would like to use the old message or
would like to record a new one. Confirm
with OK.
Notice
Tone Dialling
The telephone on this connection must be set to
tone dialling. Press a key within 50 seconds, oth-
erwise the connection is cut-off (country and
network dependent).
Notice
Conserving Function of Fax Recep-
tion Mode
If you select the 5/2 option for the number
of rings of the answering machine, the
answering machine switches on after two
rings, when you have received new messages.
If there are no new messages, the device rings
five times. If the device does not pick up after
two rings, you have no new messages. You
can terminate the remote access without
incurring any telephone costs.
Notice
Aborting Current Function
Occasionally the answering machine might not
react to your entry—for example while you are
listening to a message. Cancel the current func-
tion by pressing . Select the next function
with the appropriate number key.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem phonefax 4840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem phonefax 4840 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info