424291
17
Zoom out
Zoom in
Previous page
1/44
Next page
Answering Machine · Listening to Messages 17
EN
4 Use [ to select whether you would like the outgoing
message to be switched on/off without recording the
message.
5 Confirm with OK.
6 Recording a New Outgoing Message: Press OK
to record an outgoing message. Wait for the confirma-
tion tone before you say your text.
7 Press OK to end the recording. The recording is played
back.
Listening to Messages
Listening to Messages
Listening to New Messages
Indication of New Messages
If new messages have been received on the answering
machine, the ä key blinks. The number of the new
messages is shown on the display.
1 Press ä.
2 Confirm with OK.
3 The new messages are played back.
Playing Messages again
1 Press b.
2 Using [ select
MESSAGES.
3 Confirm with OK.
4 Using [ select
MESSAGE: PLAY.
5 Confirm with OK. The messages are played back.
Deleting Messages
Deleting Individual Message
During playback, press C and OK in order to delete the
currently playing outgoing message.
Deleting Messages already Played
Deleting New Messages
1 Press b.
2 Using [ select
MESSAGES.
3 Confirm with OK.
4 Using [ select
MESSAGE: DELETE.
5 Confirm with OK. The heard messages are deleted.
Setting up Forwarding and
Remote Access
Entering Access Code
Access Code
You must enter an access code to be able to receive trans-
ferred messages, or listen to and control your answering
machine from other telephones.
Remote Control On/Off
Notice
Access Function
You can also call the function by pressing
OK, 76 and OK.
Notice
Overwriting Existing Outgoing Mes-
sage
When you record an outgoing message, you
are asked, if you would like to use the old
outgoing message or would like to record a
new one. Confirm with OK.
Notice
Length of Outgoing Message
The outgoing message must be longer than
ten seconds.
Notice
Listening to Messages
Press # to play the next message. With the
number keys, you can load the desired message
directly. During playback, press C and OK in
order to delete the currently playing outgoing
message. Using [, set the volume. Stop the
playback with j.
Notice
Access Function
You can also call the function by pressing
OK, 72 and OK.
Notice
Deleting New Messages
Messages not yet heard must be heard first
before deleting them.
Notice
Access Function
You can also call the function by pressing
OK, 72 and OK.
Notice
Deleting Heard Messages
You can also delete the already heard mes-
sages by pressing C and OK in the starting
mode.
Notice
Remote Control On/Off
The remote control is switched off with the fac-
tory-installed access code (
0000). Change the
access code to switch on the remote control. If
you want to switch the remote control off enter
the factory-installed code
0000 again.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sagem phonefax 4840 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sagem phonefax 4840 in the language / languages: English as an attachment in your email.

The manual is 6,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info