714880

Sage SBL920 Manual

11
Zoom out
Zoom in
Previous page
1/100
Next page
11
EN
Troubleshooting
PROBLEM EASY SOLUTION
Motor doesn’t start or
blade doesn’t rotate
• Check the blender jug and lid are securely in place.
• Check that the power plug is properly inserted into the power outlet.
• Check the ON | OFF button and selected function button is illuminated.
Food is unevenly
chopped
• Use the Tamper when blending to help move the ingredients around.
• Reduce the speed so the blades have more chance of grabbing the food
• This can happen when too much food is being blended at one time.
Try a smaller amount, and work in batches if necessary.
• The ingredients may be too large. Try cutting into smaller pieces.
For best results, ingredients should be in pieces no larger than 2cm.
Food is chopped too
ne or is watery
• Try blending for shorter period of time or slower speeds.
• Use the ICE CRUSH | PULSE function for better control.
Food sticks to blade
and jug
• The mixture may be too thick. Try adding more liquid and/or using a slower
speed for blending
Food stuck under
blades
• To remove any food that cannot easily be scraped out from under the
blades, replace lid and turn blender back on high speed for 4–5 seconds to
spin foods out from under blades.
Blender overloaded
• This blender has a motor protection feature to protect against over heating
and/or over current use. When activated OVERLOAD PROTECTION will
ash on the LCD and the blender will be inoperable.
• If activated, turn the blender o by pressing the ON | OFF button on the
control panel, switch of at the wall and unplug the blender. Wait a few
minutes then re-plug and power ON the blender.
• If OVERLOAD PROTECTION is still ashing, repeat and leave the blender
to cool down for at least 20–30 minutes. Once OVERLOAD PROTECTION
has disappeared from the screen the blender is ready to be used again.
• We recommend blending in smaller batches, or cutting ingredients into
smaller pieces.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage SBL920 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage SBL920 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info