617971
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
PREPARING THE FAST SLOW PRO™
1. Remove and safety discard any packaging
material, promotional labels and tape from
the cooker.
2. Open the lid by turning the lid knob
counter clockwise and lifting the lid up and
off the appliance until it is in the hinged
open position. Unscrew and remove the
sealing nut from the centre of the lid and
pull the lid away to remove from the lid arm.
3. Wash the lid, removable cooking bowl and
silicone lid seal in hot, soapy water, then
rinse and dry thoroughly. Wipe the inside
and outside of the cooker base with a soft,
damp cloth and dry thoroughly.
4. The silicone lid seal is reversible and can
be inserted in either direction. Insert the
silicone lid seal around the outer edge of the
wire ring on the underside of the lid. Ensure
that it is fully inserted and lies flat under the
wire ring.
5. The lid can only be inserted one way and
must be assembled correctly for the cooker
to operate. Position the lid so the steam
release valve cover is to the rear of the
cooker (Image A). Align the centre of the
lid with the bolt on the underside of the lid
arm (Image B) and push it into position to
expose the screw thread. Screw the sealing
nut, with the red ring touching the lid, onto
the bolt to secure the lid. Once assembled,
ensure the steam release valve is properly
seated in position and facing the lid knob.
Pressure
Release
Valve Cover
towards rear
of cooker
Image A
Image B
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BPR700 - the Fast Slow Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BPR700 - the Fast Slow Pro in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BPR700 - the Fast Slow Pro

Sage BPR700 - the Fast Slow Pro Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 148 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info