711631
16
Zoom out
Zoom in
Previous page
1/24
Next page
16
9. At the end of the PIZZA cycle, the oven alert
will sound. The START/CANCEL button
backlight will go out and the LCD screen will
illuminate blue.
NOTE
If using the included pizza pan, place it in the oven
during the preheating cycle for the best result.
Carefully place pizza on the heated pizza pan.
A note on pizza stones
When using a pizza stone, it is necessary
to preheat the stone, without a pizza, for
optimum results.
1. Insert the wire rack, with the spokes facing
upward, into the middle rack height position.
2. Place pizza stone on the center of the wire rack
so air will ow around all sides of the stone.
3. Close the door and proceed according to pizza
function instructions.
REHEAT FUNCTION
The REHEAT function is ideal for gently reheating
leftovers without browning or drying them out.
1. Insert the wire rack into a rack position that best
suits the type of food you are reheating.
2. Place food, positioned on the included roasting
pan, pizza pan or other oven-proof dish, on the
center of the wire rack so air will ow around all
sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the REHEAT function.
The top gure on the LCD screen indicates the
preset REHEAT temperature of 165°C while
the bottom gure indicates the preset time of
‘:15 MINS’. The preset CONVECTION setting
will also be displayed.
5. The reheating temperature, time, convection
and frozen settings can be adjusted before or
during the reheating cycle.
a) The reheating temperature is displayed as
the top gure on the LCD screen. Turn the
TEMPERATURE dial to adjust the temperature
from 50°C to a maximum of 230°C.
b) The reheating time is displayed as the bottom
gure on the LCD screen. Turn the TIME dial to
adjust the time up to 2 hours.
6. Press the START/CANCEL button to activate
the REHEAT function. The button backlight will
illuminate red, the oven alert will sound and the
LCD screen will illuminate orange.
7. The timer will be displayed and begin to count
down. The cycle can be stopped at any time by
pressing the START/CANCEL button.
8. At the end of the REHEAT cycle, the oven
alert will sound. The START/CANCEL button
backlight will go out and the LCD screen will
illuminate blue.
WARM FUNCTION
The WARM function maintains hot foods at the
recommended temperature to prevent bacterial
growth, 70°C or above.
1. Insert the wire rack into a rack position that best
suits the type of food you are keeping warm.
2. Place food, positioned on the included roasting
pan, pizza pan or other oven-proof dish, on the
center of the wire rack so air will ow around all
sides of the food.
3. Close the oven door.
4. Turn the FUNCTION dial until the indicator on
the LCD screen reaches the WARM function.
The top gure on the LCD screen indicates the
preset temperature of 70°C’, while the bottom
gure indicates the preset time of ‘:1 HRS’.
The preset KEEP WARM symbol will also be
displayed.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BOV860 - the Smart Oven Air Fryer at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BOV860 - the Smart Oven Air Fryer in the language / languages: English as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info