617987
10
Zoom out
Zoom in
Previous page
1/22
Next page
19 20
PAge heAder..... PAge heAder.....
OPERATING YOUR NEW APPLIANCE
2 CUP Volume Programming
Grind, Dose and Tamp the portalter.
Insert the portalter into the group head.
While 2 CUP is displayed, press SELECT
dial to start espresso extraction, when
required espresso volume has been
extracted, press SELECT dial to stop
extraction. The machine will sound a long
beep to show volume has been saved.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Shot Temperature
Press SELECT dial & current temperature
will flash. Turn the SELECT dial to
required temperature & press SELECT dial
to confirm. The machine will beep once to
confirm new temperature.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Clean Cycle
PUSH will be displayed on LCD screen.
Insert the supplied cleaning disk & a
cleaning tablet into the portafilter.
Lock portafilter into Group Head. For
further information on Clean Cycle, refer to
Care & Cleaning section on page 30.
Ensure water tank is full. Press SELECT
dial to start the Clean Cycle.
Refer to detailed cleaning section at end
of instruction booklet on page 30.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Set Clock
Press SELECT dial to change the current
time displayed. Current time will flash.
Turn SELECT dial left or right to adjust
time as required. Turning the SELECT
dial faster or slower will change the rate of
adjustment. When required time has been
selected, press the SELECT dial to set.
Machine will beep once to conrm.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
OPERATING YOUR NEW APPLIANCE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Auto Off
This function sets how long the machine
will stay turned on without any activity.
It can be set for 10mins, 30mins, 1hr,
2hrs, 3hrs, 4hrs, 5hrs, 6hrs, 7hrs or 8hrs
of inactivity time until Auto Off activates.
To change Auto Off time, press SELECT
dial, current Auto Off setting is displayed.
Rotate SELECT dial to select required time,
press SELECT dial to confirm. Machine
will beep once to conrm new setting.
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Auto Start
NOTE
If you try to turn Auto Start ON,
without first setting the Clock, the
machine will beep 3 times and display
the current time. If you have just
turned the machine on it will be set
to 12:00am.
Press SELECT dial to select Auto Start
time. Rotate dial to select On or OFF. Press
SELECT dial to confirm.
Rotate SELECT dial left or right to adjust
Auto Start time as required.
(PLEASE NOTE: At this point, LCD screen
may prompt you to set actual time first,
if it has not already been done - see
NOTE above).
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
SELECTSELECTSELECT
TEMP TEXTURETEMP TEXTURETEMP TEXTURE
Turning the SELECT dial faster or slower
will change the rate of adjustment. When
required time has been selected, press the
SELECT dial to set Auto Start ON. A small
clock icon will be displayed in the LCD
when the Auto Start function is active.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BES980 - The Oracle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BES980 - The Oracle in the language / languages: English as an attachment in your email.

The manual is 2,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sage BES980 - The Oracle

Sage BES980 - The Oracle Quick start guide - English, German, Dutch, French, Italian, Portuguese, Spanish - 204 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info