711614

Sage BDC450 Manual

13
Zoom out
Zoom in
Previous page
1/120
Next page
13
EN
REPLACING THE WATER FILTER
1. Remove old water lter and separate the
adapter from the lter cartridge. Discard old
cartridge.
2. Soak the new lter in cold water for 5 minutes.
3. Attach water lter to adapter. Insert the
assembled water lter and adapter into the
water tank.
4. Fill the water tank with cold water to the
indicated MAX marking.
5. Navigate the SETTINGS menu and set YES to
the NEW FILTER.
NEW FILTER
DESCALING
After regular use, hard water can cause mineral
build up in internal components, reducing the
brewing ow, brewing temperature, power of the
machine, and taste of the coee.
We recommend to descale regularly. When LCD
shows “DESCALE” (ashing), descaling cycle
is needed but the cycle can be performed at
anytime. Descaler is available on the Sage website.
NOTE
It takes approximately 33 minutes to complete
descaling cycle.
1. Empty the water tank and remove the water
lter.
2. Prepare a descale solution in accordance with
manufacturer’s instructions. Pour this solution
into the empty water tank , do not exceed MAX
marking.
3. Place the basket and the carafe into position
under the drip stop outlet, Ensure the carafe
is empty and the lid is securely locked.
4. Navigate SETTINGS menu to DESCALE.
Press SELECT dial to start the cycle. The time
remaining will display on the LCD.
5. When the descaling process is nished, the
LCD screen will go back to the main menu.
To completely remove residual water in the
tank, brew with fresh water twice. Discard the
water from the carafe and rinse thoroughly.
NOTE
We recommend to brew through again after
descaling to brew out the residue descale solution.
NOTE
You cannot stop the descaling process mid cycle.
Force stop by unplugging the cord from the
power outlet.
FACTORY RESET
This will reset the machine to the factory settings,
including water hardness setting. Hold the START
button, the SELECT button, and AUTO START
button altogether for 3 seconds. When LCD shows
“rES” (ashing), press SELECT button to start.
Rotate between YES or NO and press to conrm.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sage BDC450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sage BDC450 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 6,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info