767114
14
Zoom out
Zoom in
Previous page
1/28
Next page
C. Basic Use
25 26
Thread Harness OVER
Metal Bar
Pull harness through the
back.
Harness MUST go OVER the
metal bar and lay BETWEEN
the metal bar and plastic
handle of the headrest
adjuster.
c.
Attach Harness Straps to
Splitter Plate
From the bottom of the child
restraint, fit the harness strap
loops onto the splitter plate.
The sewn end of the
harness strap loops MUST
face towards you. DO NOT
twist harness straps or
harness tightening strap and make sure the harness
straps are COMPLETELY ON the splitter plate.
Failure to place the harness
tightening strap between
shell and the harness
straps as shown can result
in serious injury or death.
Harness straps MUST be
threaded over the metal
bar and lay between the metal bar and the
plastic handle of the headrest adjuster.
Harness system must be reattached
correctly.
Failure to follow these warnings can result
in serious injury or death.
3.
C-7 Removing Seat Pad for Cleaning
You must remove the harness system to remove the
pad. See section C-5.
Remove the Elastic
Straps
From the back, release the
elastic straps at the top and
sides of the restraint.
2.
Remove Headrest Pad
Place headrest in the
highest position. Starting
from the top, gently pull
pad off of headrest.
Release the elastic straps
at the bottom of the
restraint.
a.
1.
continued on next page.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Safety 1st Summit 65 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Safety 1st Summit 65 in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info