489717

Saeco Xsmall SUP 033R Manual

23
Zoom out
Zoom in
Previous page
1/104
Next page
23
English
INSTALLATION - ADJUSTMENTS
• (Fig. 2) - Fill the container with coffee beans.
Note: The grill on top of the coffee bean hop-
per cannot and must not be removed.
Only coffee beans must be put into the coffee
bean hopper (2). Ground coffee, instant coffee
or any other object may damage the machine.
• Replace the lid (1) on the coffee bean hopper (2).
• (Fig. 5A) - Insert the plug into the socket located on the
back of the machine.
• (Fig. 5B) - Insert the plug of the other end of the power
cord into a wall socket with suitable power voltage.
• Make sure control dial (17) is on "
" position; if this
is not the case, set it to that position.
• (Fig. 6) - Simply press the ON/OFF button (16) to
turn the machine on; the warning light (18) will begin
to blink rapidly indicating that the water circuit must
be primed.
4.4 Priming the Water Circuit
• (Fig.7) - To prime the water circuit, place a container
below the steam wand (Pannarello for Plus version)
(10).
• (Fig. 9) - Turn the control dial (17) clockwise to set it
to the "
" position and wait.
When water regularly comes out and the warning light
(18) will blink slowly, indicating that you can turn off the
control dial, rotate the control dial counter-clockwise
to set it back to the "
" position.
• At this point the temperature light (19) begins to blink
slowly, indicating that the machine is in warm-up
mode.
Note: Before starting the machine after long
periods of inactivity or if the water tank has
been completely emptied, it is recommended that
the circuit be primed.
When warm-up is complete, the machine
performs a rinse cycle of the internal circuits
(see section 4.4).
• When the above steps are complete, the machine is
ready for use.
• To brew coffee, dispense hot water or steam, and
for a proper use of the machine, carefully follow the
instructions provided.
4.5 Rinse/Self-Cleaning Cycle
This cycle rinses the coffee circuits with fresh water.
The rinse/self-cleaning cycle is carried out:
• When the machine is turned on (with cold boiler)
• After priming the water circuit (with cold boiler)
• During the warm-up phase (if a coffee product has
been brewed)
• When the machine is turned off (if a coffee product
has been brewed)
Note: Place a container beneath the dispen-
sing spout (5) before the dispensing starts
(Fig. 8).
A small amount of water will be dispensed which will
rinse and heat all the machine components; in this
phase the lights will fl ash counter-clockwise.
Wait for the cycle to fi nish automatically. You can stop
dispensing as well, by pressing either coffee button.
5 ADJUSTMENTS
The machine that you have bought allows for certain
adjustments that will permit you to use it to its full
potential.
5.1 Saeco Adapting System
Coffee is a natural product and its characteristics may
change according to its origin, blend and roast. The
Saeco coffee machine is equipped with a self-adjusting
system that allows the use of all types of coffee beans
available on the market (not including flavored or
carmelized).
• The machine automatically adjusts itself in order to
optimize the extraction of the coffee, ensuring perfect
compression of the beans to obtain a creamy espresso
coffee that will release all the aromas, regardless of
the type of coffee used.
• The optimization process is a learning process that
requires the brewing of a certain number of coffees
to allow the machine to adjust the compactness of the
ground coffee.
• Attention should be given to special blends, which
require grinder adjustments in order to optimize the
extraction of the coffee (see section 5.2).
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Xsmall SUP 033R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Xsmall SUP 033R in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Saeco Xsmall SUP 033R

Saeco Xsmall SUP 033R User Manual - English, German - 53 pages

Saeco Xsmall SUP 033R User Manual - Dutch - 16 pages

Saeco Xsmall SUP 033R User Manual - Italian - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info