660263

Saeco Lirika Manual

25
Zoom out
Zoom in
Previous page
1/40
Next page
• 25 •
Machine Installation - Service Provider Manual
9.8 Electrical Connection
This operation must only be performed by special-
ised technical personnel or by the service provider.
The machine is designed to work with single-phase voltage
matching the rating indicated on the identi cation plate (section
1.4 "Machine Identi cation").
Before plugging in the machine, make sure that the power button
is switched to "0".
The Service Provider makes and is responsible for the electrical
connection of the machine.
The machine should be connected to the mains using the plug
installed on the power cord, in accordance with:
• The Laws and Regulations in force at the place and time of
installation;
• The information shown on the technical speci cations plate
on the side of the machine.
Warning: The electric socket which the appliance
is connected to should be easily accessible by the
user, in order to allow it to be easily disconnected from
the mains when necessary.
It is forbidden to:
• Use extensions of any kind.
• Replace the original plug.
• Use adapters.
9.9 Turning on/o the Machine
The machine can be turned on/o by pressing the button located
to the rear of the machine (Fig.02, page 3).
9.10 First Use - Use After a Long Period
of Inactivity
For a perfect Espresso: Rinse the co ee circuit if using the
machine for the  rst time or after a long period of inactiv-
ity.
These simple operations will allow you to always brew excellent
co ee. They have to be performed:
A) At  rst start-up;
B) When the machine remains inactive for a long time (more
than 2 weeks).
9.10.1 At First Start-up
To turn on the machine simply press the " " button (21). The
control panel indicates that the circuit must be primed.
1
Place a large container under the dispensing spout (Fig.11,
page 3).
YELLOW
The machine automatically starts circuit priming. It will then carry
out the warm-up and rinse cycle as described in section 3.4.
9.10.2 After a Period of Inactivity
1
Empty the water tank, wash and rinse it and  ll it with fresh
water (see section 9.6).
2
Place a large container under the dispensing spout (Fig.11,
page 3).
3
Press the " " button (19) to start the brewing procedure.
4
The machine will brew co ee through the dispensing spout
(Fig.11, page 3); wait until the procedure is complete and emp-
ty the container.
5
Repeat the operations from step 2 to step 4 three times, then
continue with step 6.
6
Place a container under the steam/hot water wand (Fig.10,
page 3).
7
Press the " " button (23) to start dispensing HOT WATER.
Dispense water until the no water icon is displayed.
RED
8
When the hot water dispensing procedure is complete,
empty the container.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Lirika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Lirika in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info