660263
24
Zoom out
Zoom in
Previous page
1/40
Next page
• 24 •
Machine Installation - Service Provider Manual
9.4 Assembly-Siting
The machine should not be installed outdoors or
in environments in which jets of water or steam
are used.
The presence of magnetic  elds or proximity to
electrical machines which generate interference
could cause the electronic controls of the machine to
malfunction. At temperatures close to 0°C, internal parts
containing water are at risk of freezing. Do not use the
machine under these conditions.
To ensure correct and e cient performance of the appliance,
comply with the following recommendations:
room temperature: 10°C - 40°C;
maximum humidity: 90%;
the site should be suitably prepared for the installation of the
machine;
the surface on which the machine is installed should be level,
solid and stable, with a gradient of max. 2°;
the location should be adequately lit, ventilated and clean,
and the power socket should be easily accessible.
Access to the machine and the plug should be kept
clear at all times, in order to allow users to easily
reach them and to leave the area immediately if required.
The following illustration shows the required access distances:
to the keypad on the front of the appliance;
to the service units in the event of malfunction.
After placing the packaged product near the installation site, pro-
ceed as follows:
ensure that the packaging has not been tampered with dur-
ing transport and that the original packaging is intact and
closed;
open the packaging;
check the condition and model of the machine;
check the content of the accessories bag enclosed with the
machine (see "9.3 List of Accessories");
remove the machine from its original packaging;
remove any remaining packaging from the machine;
lift the machine and place it in the designated area.
9.5 Disposal of Packaging
After opening the outer box, it is recommended that the packag-
ing materials are separated according to type and disposed of in
accordance with the regulations in force in the country of use.
We recommend keeping the outer box for future
transfers or transportation.
9.6 Filling the Water Tank
Before turning on the machine, the water tank should be  lled
with fresh drinking water.
Warning! Before using the machine for the  rst
time, wash the water tank carefully. Fill the water
tank with fresh drinking water only. Hot or carbonated
water, as well as other liquids, will damage the machine.
Refer to section 3.1. to carry out the procedure correctly.
9.7 Filling the Co ee Bean Hopper
Before turning on the machine, check that the hopper contains a
su cient quantity of co ee beans.
Warning! Only co ee beans must be put into the
co ee bean hopper. Ground co ee, instant co ee
or any other object may damage the machine.
Refer to section 3.2. to carry out the procedure correctly.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Saeco Lirika at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Saeco Lirika in the language / languages: English as an attachment in your email.

The manual is 2,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info