5 COFFEE BREWING
• Duringthisoperation,thebrewbutton(15)mayashon
and o; this is to be considered as standard operation and
not a fault.
• Beforeusingthemachine,makesurethatthehotwater/
steam knob (3) is closed and that there is enough water in
the tank.
• (Fig.7) - Press the ON/OFF button (17).
• Waituntilthebrewbuttonlight(15)turnson.Thema-
chine is now ready for coee brewing.
5.1 Using ground coffee
• - Insert the ground coee lter (11) into the
Portalter (14).
• - Insert the Portalter in the brew unit from the
bottom (7).
• - Turn the Portalter from left to right until it locks
in place. Release the grip from the Portalter. The handle
slightly turns to the left. This movement guarantees the
perfect operation of the Portalter.
• - Preheat the Portalter by pressing the brew
button (15). Water will pour out of the Portalter (this
operation is only necessary for the rst coee).
• Aftera few ouncesofwaterhaveowedout,press the
brew button (15) again to stop hot water dispensing.
• (Fig.16) - Remove the Portalter from the machine by
turning it to the left and pour out any water left. As the
machine is tted with the special Portalter (14), there is
no need to change the lter to make one or two coees.
• - Add 1 or 2 level measuring scoops of ground
coee to the lter for one or two coees; clean any coee
residues from the edge of the Portalter.
• (Fig.11) - Insert the Portalter (14) in the brew unit from
the bottom (7).
• - Turn the Portalter from left to right until it
locks in place.
• (Fig.13) - and place them
under the Portalter; check that they are correctly placed
under the coee dispensing holes.
• - Press the brew button (15).
• When the desired quantity of coee has been reached,
press the brew button again (15) to stop the coee
brewing and remove the cups of coee (Fig.15).
• (Fig.16) - Wait a few seconds after brewing, then remove
the Portalter and empty the remaining coee grounds.
5.2 Using Coffee Pods
• - Remove the ground coee lter (11) from the
Portalter (14) by pulling it out.
• (Fig.10) - Insert the coee pod adapter (13) - with the
curved part facing down - into the Portalter (14); then
insert the pod lter (12).
• (Fig.11) - Insert the Portalter into the brew unit from the
bottom (7).
• - Turn the Portalter from left to right until it
locks in place.
• Release the grip from the Portalter. The handle
automatically turns slightly towards the left.
This movement assures the perfect operation of the
Portalter.
• (Fig.14) - Preheat the Portalter by pressing the brew
button (15). Water will pour out of the Portalter (this
operation is only necessary for the rst coee).
• Aftera few ouncesofwaterhaveowedout,press the
coee button (15) again to stop hot water dispensing.
• (Fig.16) - Remove the Portalter from the machine
by turning it from right to left and emptying out the
remaining water.
• InsertthepodinthePortalter;makesurethepaperfrom
the pod does not hang over the edge of the Portalter.
• (Fig.11) - Insert the Portalter into the brew unit from the
bottom (7).
• - Turn the Portalter from left to right until it
locks in place.
• Take and place it under the Portalter;
check that it is correctly placed under the coee dispensing
holes.
• - Press the brew button (15).
• When the desired quantity of coee has been reached,
press the coee button (15) again to stop coee brewing
and remove the cup of coee.
• (Fig.16) - Wait a few seconds after brewing, then remove
the Portalter and dispose of the used pod.