661068
44
Zoom out
Zoom in
Previous page
1/116
Next page
6
Before you start mowing, always check the condition and firm attachment
of the cutting blade. The blade attachment screw must always be tightened
by an authorised workshop. If the blade screw is too tight or too loose, the
blade coupling and cutter bar can become damaged or loose which can
lead to serious injuries. A worn or damaged blade must always be
replaced.
Pos: 13.8.10 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Auswechseln, Nachschleifen ... Auswuchten ...Messers Benzinmäher neu @ 10\mod_1250583617106_1521.docx @ 86710 @ @ 1
Changing, regrinding and balancing the cutting blade must be carried out
by an authorised professional workshop.
A wrongly assembled cutting blade coupling can allow the cutting blade
bar to get loose and cause severe injuries.
An improperly ground and imbalanced cutting blade can cause strong
vibrations and damage the lawn mower.
Pos: 13.8.11 /Innenteil/Sicherh eitsvorschriften/Wartung und Lagerung/Auf festen Sitz des Zündkerzensteckers achten @ 13\mod_1280215290591_1521.docx @ 110043 @ @ 1
Make sure that the spark plug connector is firmly seated! Touching is only a risk if
the spark plug connector is not installed correctly.
Pos: 13.8.12 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Beschädigte Teile ersetzen @ 0\mod_1115186070093_1521.docx @ 1634 @ @ 1
For reasons of safety, always replace worn or damaged parts.
Pos: 13.8.13 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Schutzhandschuhe tragen @ 0\mod_1115186195468_1521.d ocx @ 1646 @ @ 1
Protective gloves must be worn at all times during maintenance and
cleaning work.
Pos: 13.8.14 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Zündkerzenstecker, Zündschlüssel abziehen (wenn vorhanden) Mäher @ 42\mod_1460545789967_1521.docx @ 435674 @ @ 1
Maintenance and cleaning work may only be carried out on level surfaces
with the engine switched off, spark plug connector disconnected and
ignition key removed (if present).
Regular maintenance is essential for safety and top performance.
Pos: 13.8.15 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Kerzenstecker niemals bei laufendem Motor abziehen @ 13\mod_1280219056956_1521.docx @ 110075 @ @ 1
Never remove the spark plug connector when the motor is running! Risk: Electric
shock.
Pos: 13.8.16 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Tank nur im Freien entleeren @ 0\mod_1115186486750_1521.docx @ 1649 @ @ 1
If the tank has to be emptied, this should be done in the open, and with a cold
engine. Take care to ensure that no fuel is spilt.
Pos: 13.8.17 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Lagerung, Zündschlüssel abziehen (wenn vorhanden) Mäher @ 42\mod_1460546180775_1521.docx @ 435730 @ @ 1
Always store the equipment in a clean state in a closed, dry room and
inaccessible to children.
Always remove the ignition key (if present) during storage, to prevent
unauthorised actuation of the starter or mower.
Pos: 13.8.18 /Innenteil/Sicherheitsvorschriften/Wartung und Lagerung/Nur Originalersatzteile verwenden SABO+JD @ 26\mod_1377168488208_1521.docx @ 187532 @ @ 1
For reasons of warranty and safety, only genuine spare parts may be used.
Non-equivalent spare parts can damage the machine and are a safety hazard.
Pos: 14.1 /---------- 1 Leerzeile ---------- @ 0\mod_1114611787140_1521.docx @ 2070 @ @ 1
Pos: 14.2 /Innenteil/Beschreibung der Bauteile/1 BESCHREIBUNG DER BAUTEILE @ 0\mod_1115187892468_1521.docx @ 1664 @ 1 @ 1
7 DESCRIPTION OF COMPONENTS
Pos: 14.3 /Innenteil/Beschrei bung der Bauteile/43-A ECONOMY, 43-VARIO (SA1855), 43-VARIO E, R43S @ 50\mod_1488789171995_0.docx @ 561625 @ @ 1
43-A ECONOMY, 43-VARIO (SA1855), 43-VARIO E, R43S
Pos: 14.4 /Innenteil/Beschreibung der Bauteile/Bild 43-A ECO, 43-VARIO SA1855, 43-VARIO E SA1856, R43S SA1754 SA1742 SA1765 @ 50\mod_1488790200724_0.docx @ 561681 @ @ 1
Pos: 14.5 /Innenteil/Beschreibung der Bauteile/Beschreibung der Bauteile 43-A ECO,43-VARIO SA1855,43-VARIO E SA1856, R43S SA1754 SA1755 SA1765 Text @ 50\mod_1488790665127_1521.docx @ 561709 @ @ 1
1 Safety control bar engine brake
2 Vario actuation (depending on the model)
3 Drive control bar
4 Tank cap
5 Engine cover
6 Cutting height setting
7 Air filter
8 Spark plug
9 Carrying handle
10 Exhaust protection grid
11 Belt drive cover
12 Oil refill neck with dipstick
13 Ejector flap
14 Fast release (depending on the model)
15 Starter cable handle
16 Starter key (depending on the model)
Pos: 14.6 /Innenteil/Beschrei bung der Bauteile/43-VARIO (SA1455), R43V, R43VE @ 50\mod_1488789973726_0.docx @ 561653 @ @ 1
43-VARIO (SA1455), R43V, R43VE
Pos: 14.7 /Innenteil/Beschreibung der Bauteile/Bild 43-VARIO, 43-VARIO E, R43V, R43VE SA1456 mit Schnellspanner @ 44\mod_1469527206263_0.docx @ 508638 @ @ 1
Pos: 14.8 /Innenteil/Beschreibung der Bauteile/Beschreibung der Bauteile 43-VARIO, 43-VARIO E, R43V, R43VE SA1456 Text @ 43\mod_1468410355734_1521.docx @ 502496 @ @ 1
1 Safety control bar for motor stop
2 Vario actuation (depending on the model)
3 Drive control bar
4 Oil refill neck with dipstick
5 Engine cover
6 Cutting height setting
7 Exhaust protection grid
8 Spark plug
9 Carrying handle
10 Air filter
11 Belt drive covers
12 Tank cap
13 Ejector flap
14 Quick release
15 Starter cable handle
16 Starter key (depending on the model)
Pos: 14.9 /Innenteil/Beschrei bung der Bauteile/Alle Modelle_dl_text_bold_8 @ 33\mod_1409212920947_1521.docx @ 245827 @ @ 1
All models
Pos: 15.1 /---------- 1 Leerzeile ---------- @ 0\mod_1114611787140_1521.docx @ 2070 @ @ 1
Pos: 15.2 /Innenteil/Vorbereitende Arbeiten/1 VORBEREITENDE ARBEITEN @ 0\mod_1115194917734_1521.docx @ 1672 @ 1 @ 1
8 PREPARATION
Pos: 15.3 /Innenteil/Vorbereitende Arbeiten/Vorbereitende Arbeiten Text 43/47/54er SABO+JD @ 39\mod _1440419073397_1521.docx @ 415217 @ @ 1
The following unit parts are included in the package for mower assembly:
Mower with pre-assembled guide bar
Grass catch, collecting bag frame
Tool bag containing the following:
Operator’s manual with Declaration of Conformity
Warranty conditions (depending on model)
Diverse attachment parts.
Should a part be missing, please contact your professional dealership.
Pos: 15.4 /Innenteil/Vorbereitende Arbeiten/Vor Montage... Holm und...Starterseilhalter...Zündkerzenstecker abziehen! Hinweis @ 32\mod_1408441229475_1521.docx @ 239124 @ @ 1
NOTE
Always remove the spark plug connector before fitting the bar and the starter
cable holder. Following assembly, at the latest before starting the engine, push
the spark plug connector back in place.
Pos: 15.5 /Innenteil/Vorbereitende Arbeiten/1.1 Führungsholm hochstellen (Abbildung A1 + B1 + V4 + E1) @ 44\mod_1469606603419_1521.docx @ 508963 @ 2 @ 1
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sabo R43S at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sabo R43S in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info