Attaching the connecting cable to the strain relief fitting
(Illustration D2 )
Pos: 15.10 /Innenteil/Inbetriebnahme des Elektro-Mähers/Vertikutierers/Einhängen des Anschlusskabels in der Zugentlastung 80cm Text @ 14\mod_1281012838248_1521.docx @ 111031 @ @ 1
ATTENTION
The unit may not be used without the cable relief in order to prevent damages to
the switch/plug combination and to the cable. The cable must be hung in the
cable relief on the unit to ensure that it is fixed safely. This prevents the cable
socket from being pulled off the unit. Moreover, the cable aligns itself
automatically on the other side when cornering.
– Form a semi-circular loop in the cable, keep a distance of approx. 80 cm from the
connection cable coupling.
– Insert the cable from the bottom into the cable relief and loop it around the
fastening post.
– Hold the cable by both ends and pull it firmly into the cable relief.
Pos: 15.11 /Innenteil/Inbetriebnahme des Elektro-Mähers/Vertikutierers/1.1 Starten des Motors (Abbildung A2) @ 0\mod_1125645755692_1521.docx @ 1724 @ 2 @ 1
Only start the engine when you are standing behind the mower.
Always place the mower on a level area which is not covered with high grass (if the
grass is too high it will block the cutter bar start-up and make starting the mower more
difficult). When the engine is started, the machine must not be tilted on end, if
necessary it must be tilted by pressing the guide bar down so that the cutting tool is
pointing in the direction away from the user, but only as far as absolutely necessary. As
long as the mower has not been lowered to the ground again, both your hands must be
on the top part of the bar.
Pos: 15.13 /Innenteil/Inbetriebnahme des Elektro-Mähers/Vertikutierers/Starten des Motors Text Mäher @ 0\mod_1125661303195_1521.docx @ 1730 @ @ 1
– To switch on the motor, first press and hold the red button.
– With the other hand, pull the safety grip on the upper handlebar section. The grip
must be held in this position during operation.
– The red button can then be released.
Pos: 15.14 /Innenteil/Inbetriebnahme des Elektro-Mähers/Vertikutierers/Motor läuft nicht an nach 5 Sekunden Hinweis Mäher @ 13\mod_1280933201843_1521.docx @ 110724 @ @ 1
IMPORTANT
If the motor does not start 5 seconds after the unit is started, then
1. Let go of the switch holder
2. Pull the plug!
3. Check the power cable
4. Check the power supply at the building (fuse)
5. Check the unit for blockages in the mowing chamber
6 Get it checked by an authorised specialist workshop.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Sabo 36-EL at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Sabo 36-EL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.
The manual is 3,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
