628346
20
Zoom out
Zoom in
Previous page
1/40
Next page
1
5
4
2
3
Fig. 2 shows the unit mounted on the support H0564.
Fig. 3 shows the unit directly mounted on the main aluminum plate.
Use your judgment to decide whether you need to install your FBL unit as shown in Fig 2 or
Fig 3. This will depend on the size of the FBL unit itself and the arrangement of the wires.
With larger units, the nylon nut can make it difficult to connect the wires to the unit, in this
case it is recommended to use the aluminum support H0564.
With smaller units, the unit can be installed directly onto the main plate.
This facilitates boom removal in the future if necessary.
We recommend using some type of adhesive to prevent the servo wires and connections
from coming unplugged from the receiver or FBL unit. You can use hot glue for this purpose.
FBL Unit
Double-
sided Tape
Bag 9
FLYBARLESS CONTROL UNIT AND RX INSTALLATION
We suggest the use of a “single unit” FBL system (all in one type unit).
This allows for easier wire routing considering the small size of this helicopter.
Position 1 can be used to install the FBL unit.
Position 2 and 3 can be used to install a small RX unit, like a Spektrum satellite.
Position 4 and 5 can be used to install RX unit.
FBL
Support
(H0564-S)
Socket Head Cap
Screw M2.5x8mm
(HC020-S)
Page 18
Chapter 12, Installation Of Flybarless Unit and RX
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division GOBLIN 380 KYLE STACY EDITION at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division GOBLIN 380 KYLE STACY EDITION in the language / languages: English as an attachment in your email.

The manual is 72,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info