628346

SAB Heli Division GOBLIN 380 KYLE STACY EDITION Manual

18
Zoom out
Zoom in
Previous page
1/40
Next page
0.75 mm 0.75 mm
1.5 mm
Belt 304-2GT-09
(HC454-S)
MOTOR BELT TENSION
*Assemble the motor and pulley to its mounting plate.
*Install the motor assembly in the helicopter.
*It is easy to install the belt with the motor assembly pushed back towards the helicopter as far as it can go.
First put the belt on the motor pulley.
*Then put the belt around the big pulley.
*Rotate the motor several times by hand.
*Pull and hold the motor slightly.
*Tighten the M4 nut first (It is suggested to use tool nut driver).
*The belt must be very tight.
*Tighten the rest of the bolts.
Motor Assembly
Note:
Check for vertical alignment of the motor pulley. To do this, simply turn the motor several times by hand and check to you see if
the belt is aligned properly with the big pulley (one way bearing pulley).
If the belt is riding too high, simply loosen up the motor pulley and drop it just a little bit, if it is riding too low, loosen up the
motor pulley and raise it a bit.
Correct
Incorrect
Bag 8
Fig 1:
Figure 1 shows the motor correctly
wired. It is advisable to cover the wire
joints between the motor and the ESC
with heat shrink tubing.
Page 16
Chapter 10, Installation Of The Motor
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SAB Heli Division GOBLIN 380 KYLE STACY EDITION at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SAB Heli Division GOBLIN 380 KYLE STACY EDITION in the language / languages: English as an attachment in your email.

The manual is 72,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info