Manual Ryobi RPW150-G (page 4 of 28) (English)

733431

Zoom out

Zoom in

1/28

ELECTRICAL SAFETY WARNINGS

■ The plug must match the outlet. Never modify the plug

in any way. Unmodified plugs and matching outlets

reduces the risk of electric shock.

■ Do not use the product if the power cord or other

important parts, such as safety devices, are damaged.

■ Only use a weather proof extension cord. Check the

extension cord before every use for damage. Always

uncoil the extension cord during the use because

coiled cords can overheat. Damaged extension cords

should not be repaired, they should be replaced with

an equivalent type.

■ Keep the power cord away from heat, oil, and sharp

edges.

■ Never touch the mains plug and the socket with wet

hands.

■ Inadequate extension cords can be dangerous. If an

extension cord is used, it shall be suitable for outdoor

use, and the connection has to be kept dry and off the

ground. Use a cord wheel to keep the socket at least 60

mm above the ground.

■ Electric power shall be supplied with a residue current

device (RCD) with a tripping current of not more than

30mA.

ADDITIONAL SAFETY WARNINGS

■ Some regions have regulations that restrict the use of

the product in some operations. Check with your local

authority for advice.

■ Before each use, check for damage. A damaged high-

pressure hose must be replaced immediately. Ensure

all connections, such as high-pressure hose and

nozzle, are secure. Unwind the hose properly so they

may not get twisted or kinked.

■ Do not allow children or untrained individuals to use the

product.

■ Before starting any cleaning operation, close doors and

windows. Clear the area to be cleaned of debris, toys,

outdoor furniture, or other objects that could create a

hazard.

■ Never pick up or carry the product while the motor is

running.

■ Do not use the product in temperatures below 0°C.

■ Do not use acids, alkalines, solvents, flammable

material, bleaches, or industrial grade solutions in the

product. These products can cause physical injuries to

the operator and irreversible damage to the product.

■ Always operate the product on a level surface.

WARNING

High-pressure jet can be dangerous if subject to misuse.

The jet must not be directed to people, animals, electrical

devices, or the product itself.

■ Hold the handle securely with both hands. Expect

the handle to move when the trigger is pulled due to

reaction forces. Failure to do so could cause loss of

control and injury to yourself and others.

■ Make sure the air in the hose and pump is released

before you turn on the product. To remove the air in

the hose and pump, connect the water supply to the

pump using a garden hose, connect the trigger handle

to pump using the high-pressure hose, disengage the

trigger handle lock, and press the trigger until there is

a steady flow.

■ Exercise caution to avoid slipping or falling.

■ Keep firm footing and balance. Do not overreach.

Overreaching can result in loss of balance.

■ Only use accessories that are recommended by the

manufacturer. The use of improper accessories may

cause injury.

■ Never leave the product running unattended. Turn the

product off. Do not leave the product until it comes to

a complete stop.

■ Be familiar with the controls. Know how to stop the

product and bleed the pressure quickly.

■ Stay alert and exercise control. Watch what you are

doing and use common sense.

■ Do not use the product when you are tired, ill, or

under the influence of drugs, alcohol, or medication. A

moment of inattention while operating the product may

result in serious personal injury.

■ Do not use the product if the switch does not turn it on

and off. Any product that cannot be controlled with a

switch is dangerous and must be repaired.

■ Keep a minimum distance of 30 cm when cleaning

vehicles. The high-pressure jet may damage or burst

vehicle tires and/or tire valves.

■ Use a garden hose with a maximum length of 15 m and

minimum diameter of 12 mm (1/2 in.)

CAUTION

Water blasting any asbestos-containing material,

including an asbestos roof, is illegal.

OVERLOAD PROTECTION

A thermal sensor protects the product from overloading.

The product will automatically shut the power down while

overheating. To resume operation, disconnect the product

from the power supply, wait for about 15 min to cool down,

and reconnect the product to the power supply.

TRANSPORTATION AND STORAGE

CAUTION

Mind the weight of the product when selecting the

storage location and during transportation to prevent

accidents or injuries.

My Ryobi RPW150-G will run at full pressure for about 10 seconds then stop, I release the trigger and engage again and the same thing happens.
The in line filter is clean and there is ample water pressure.
I have used my sons Ryobi cleaner and it works fine.
Any ideas
Brian Submitted on 21-11-2022 at 04:16
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi RPW150-G in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi RPW150-G Manual

Product: