Manual Ryobi EWS-1366 (page 19 of 156) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

491257

Zoom out

Zoom in

1/156

USING THE LASER GUIDE (FOR EWS-1366

ONLY) (FIG. 14)

WARNING

Do not stare into the laser beam or turn the laser

on when the tool is not in use. Failure to do so

could result in possible serious personal

injury.The laser unit comes from the factory

already installed and aligned.

NOTE: Make a trial cut on a piece of scrap to ensure

laser is aligned. Adjusting the laser may be necessary.

■ Mark the line to be cut on the workpiece.

■ Adjust the depth and angle of the cut as needed.

■ Switch on the laser beam.

NOTE: Do not touch the blade to the workpiece until the

saw has reached maximum speed.

■ Slowly push the saw forward into the workpiece.

NOTE: Keep the laser beam on the marked line on the

workpiece for precision cutting.

■ Once the cut is complete, allow the saw to come to a

complete stop before turning off the laser.

LED WORKLIGHTS (FOR EWS-1366 ONLY)

(FIG. 15)

Your saw is equiped with 2 LED WORKLIGHTS (26).

These worklight help illuminate the work piece in dimly

lit areas and helps when following the cutting line.

ADJUSTING THE LASER GUIDE (FIG. 16)

Adjust the laser angle

■ Rotate the screw clockwise to turn the laser beam to right.

■ Rotate the screw anti-clockwise to turn the laser

beam to left.

Adjust the laser position

■ Rotate the screw anti-clockwise to shift the beam to right.

■ Rotate the screw clockwise to shift the beam to left.

MAINTENANCE

After use, check the tool to make sure that it is in top

condition.

We recommended that you take this tool to an Authorised

Ryobi Service Centre for a thorough cleaning and

lubrication at least once a year.

DO NOT MAKE ANY ADJUSTMENTS WHILE THE

MOTOR IS RUNNING.

ALWAYS DISCONNECT THE POWER CORD FROM

THE SOCKET BEFORE CHANGING REMOVABLE OR

EXPENDABLE PARTS (BLADE, BIT, SANDPAPER,

ETC.), LUBRICATING OR WORKING ON THE SAW.

KEEP HANDLES CLEAN AND FREE FROM OIL AND

GREASE.

WARNING!

For greater safety and reliability, all repairs should

be performed by an Authorised Ryobi Service

Centre.

WARRANTY

All Ryobi products are guaranteed against manufacturing

defects and defective parts for a period of twenty four

(24) months from the date stated on the original invoice

drawn up by the retailer and given to the end user.

Deterioration caused by normal wear and tear,

unauthorised or improper use or maintenance,

or overload are excluded from this guarantee as are

accessories such as battery packs, light bulbs, blades,

fittings, bags, etc.

In the event of malfunction during the warranty period,

please take the NON-DISMANTLED product, along with

the proof of purchase, to your retailer or nearest

Authorised Ryobi Service Centre.

This warranty in no way affects your legal rights

concerning defective products.

LIVE TOOL INDICATOR

This tool features a live tool indicator (22) which

illuminates as soon as the tool is connected to the supply.

This warns the user that the tool is connected and will

operate when the switch is pressed.

ENVIRONMENTAL PROTECTION

Do not dispose of in general household

waste. Instead, dispose of in an

environmentally friendly way. Contact your

local recycling cetre ou council for advise.

Ryobi takes the care of the envrionment very

seriously.

English

F D E I P NL S DK N FIN GR H CZ RUS PL

SLO TR

EWS-1266EWS-1366(EU).qxd 11/24/2004 4:49 PM Page 13

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi EWS-1366 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Ryobi EWS-1366 Manual

Product: