383096
13
Zoom out
Zoom in
Previous page
1/142
Next page
GENERAL SAFETY RULES
Do not use the power tool if the switch does not turn it
on and off. Any power tool that can not be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source before
making any adjustments, changing accessories or
storing the power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of reach of children and do
not allow persons unfamiliar with the power tool or
these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools. Check for mis-alignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tools
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
Keep cutting tools sharp and clean. Properly
maintained tools with sharp cutting edges are less
likely to bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions and in the manner
intended for the paricular type of power tool, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
DESCRIPTION
1. Switch
2. Variable Speed Control Selector
3. Lock-on Button
4. Safety Guard
5. Base
6. Notch
7. Saw Blade
8. Orbital Adjustment Knob
9. Dust Port
10. Bevel Lock Lever
11. Blade Storage Area
12. Roller Guide
13. Slot
14. Edge Guide
15. Edge Guide Lock Screw
16. Quick Release Lever
17. Live tool indicator
SPECIFICATIONS
EJS-500QEO EJS-600QEO
Voltage 230 V ~ 50 Hz 230 V ~ 50 Hz
Input Power 500 W 600 W
Stroke Per Minute 0 - 2600 min
-1
600 - 2600 min
-1
Stroke Length 16 mm 20 mm
Max Cutting Capacity:
- Wood 75 mm 75 mm
- Steel 6 mm 8 mm
FEATURES
KNOW YOUR SAW
Before attempting to use your saw, familiarize yourself
with all operating features and safety requirements.
ELECTRICAL CONNECTION
Your saw has a precision built electric motor. It should be
connected only to a power supply of the type specified by
its rating plate. Do not operate this tool on direct current
(DC). Asubstantial voltage drop will cause a loss of power
and overheating. If your tool does not operate when
plugged into an outlet, double-check the power supply.
WARNING
Do not allow familiarity with tools to make you
careless. Remember that a careless fraction of a
second is sufficient to inflict severe injury.
OPERATION
SWITCH (Fig. 1)
To turn your saw ON, depress the switch (1).
Release switch trigger to turn your saw OFF.
LOCK-ON BUTTON (Fig. 1)
Your saw is equipped with a lock-on (3) feature, which is
convenient when continuous cutting for extended periods
of time is required. To lock-on, depress the switch trigger,
push in and hold the lock-on button located on the side of
the handle, then release switch trigger. Release lock-on
button and your saw will continue running.
To release the lock, depress the switch trigger and
release.
9
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
EJS-500-600QEO_20 lgs 22/01/06 17:49 Page 9
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi ejs 500 qeo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi ejs 500 qeo in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info