383100
14
Zoom out
Zoom in
Previous page
1/137
Next page
SPECIFIC SAFETY RULES
Do not charge battery tool in a damp or wet
location. Following this rule will reduce the risk of
electric shock.
For best results, your battery tool should be
charged in a location where the temperature is
more than 10°C but less than 38°C. Do not store
outside or in vehicles.
Under extreme usage or temperature conditions,
battery leakage may occur. If liquid comes in
contact with your skin, wash immediately with
soap and water, then neutralize with lemon juice
or vinegar. If liquid gets into your eyes, flush them
with clean water for at least 10 minutes, then seek
immediate medical attention. Following this rule will
reduce the risk of serious personal injury.
SPECIFICATIONS
Motor 18 V
Switch On/Off Switch
No load speed 22,500 min
-1
Collet 6.35 mm
Collet Adaptor 3.2 mm
Battery pack (not included) BPP-1815M/BPP-1817M
Charger (not included) BC-1800/BC/1815-S
FEATURES
1. Switch
2. Spindle Lock
3. Depth Adjustment Ring
4. Collet Nut
5. Adjusting Knob
6. Bit
7. Tab
8. Wrench
9. Screw
10. Nut
11. Handle
12. Pivot Point Knob
13. Threaded Ring
14. Circle Cutter Arm
15. Adaptor
16. Battery Pack (Not included)
17. Latches
18. On
19. Off
20. Tighten
21. Loosen
22. Adjust up or down
ASSEMBLY
REMOVING DEPTH ADJUSTMENT RING (Fig. 2)
Remove battery pack from spiral saw.
Place wrench in tab on depth adjustment ring.
Depress spring-loaded tab.
Lift depth adjustment ring off tool.
ASSEMBLING CIRCLE CUTTER (Fig. 3)
Remove battery pack from spiral saw.
Attach handle with screw provided.
Attach pivot point knob with nut provided.
ATTACHING CIRCLE CUTTER (Fig. 4)
Remove Battery Pack From spiral saw.
Assemble circle cutter if necessary. Refer to
“Assembling Circle Cutter.”
Remove bit if necessary. Refer to “Inserting/
Removing Bits” in this manual.
Place adaptor under depth adjustment ring.
Note: Make sure the adaptor fits snugly.
Place circle cutter arm on top of depth adjustment
ring.
Screw threaded ring onto adaptor, securing circle
cutter arm.
Insert bit. Refer to “Inserting/Removing Bits” in
this manual.
OPERATION
WARNING
Do not allow familiarity with tools to make
you careless. Remember that a careless fraction
of a second issufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses
with side shields when operating tools. Failure to
do so could result in objects being thrown into
your eyes, resulting inpossible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this tool.
The use of attachments or accessories not
recommended can result in serious personal
injury.
10
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
CSS-1801DM 29/07/05 10:52 Page 10
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi css 1801m one at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi css 1801m one in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info