383094
18
Zoom out
Zoom in
Previous page
1/209
Next page
CIRCULAR SAW SAFETY
Support large panels to minimize the risk of blade
pinching and kickback. Large panels tend to sag
under their own weight. Supports must be placed
under the panel on both sides, near the line of cut
and near the edge of the panel.
Do not use dull or damaged blades. Unsharpened
or improperly set blades produce narrow kerf causing
excessive friction blade binding and kickback.
Blade depth and bevel adjusting locking levers
must be tight and secure before making cut.
If blade adjustment shifts while cutting, it may cause
binding and kickback.
Use extra caution when making a "plunge cut"
into existing walls or other blind areas.
The protruding blade may cut objects that can
cause kickback.
WARNING
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm. Some
examples of these chemicals are:
- Lead from lead-based paints.
- Crystalline silica from bricks and cement and
other masonry products.
-Arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies,
depending on how often you do this type of work.
To reduce your exposure to these chemicals:
work in a well ventilated area, and work with
approved safety equipment, such as those
dustmasks that are specially designed to filter
out microscopic dust particles.
SPECIFICATION
DC 18V
Blade 150 mm (6") x 1.0 mm
Blade Arbor 10 mm
Cutting Depth at 0º 45 mm
Cutting Depth at 45º 32 mm
No Load Speed 4200 min-
1
Motor 18 V DC
Battery pack (not included) BPP-1817M / BPP-1815M
Charger (not included) BC-1800 / BC-1815-S
FEATURES
1. RIP GUIDE (NOT INCLUDED) SCREW
(WING SCREW)
2. BLADE KEY (5 mm HEX KEY)
3. DEPTH OF CUTADJUSTMENT
(DEPTH ADJUSTMENTKNOB)
4. BLADE KEY STORAGE COMPARTMENT
5. LOCK-OFF BUTTON
6. TRIGGER SWITCH
7. BATTERY PACK (NOT INCLUDED)
8. UPPER BLADE GUARD
9. LOWER BLADE GUARD LEVER
10. BASE ASSEMBLY
11. LOWER BLADE GUARD
12. BLADE
13. BEVELCUTADJUSTMENT
( BEVELADJUSTMENT KNOB)
14. SPINDLE LOCK BUTTON
15. DEPRESS LATCH TO RELEASE BATTERY PACK
16. LATCH
17. DUSTPIPE JOINT
18. SPINDLE
19. BLADE SCREW
20. OUTER BLADE CLAMP
21. INNER BLADE CLAMP
22. GAPBETWEEN TEETH AND RIVING KNIFE
23. TOOTHED RIM
24. RIVING KNIFE
25. DISTANCE BETWEEN LOWER EDGE OF RIVING
KNIFE AND EXTREMITY OF SAW TOOTH
26. WRENCH
27. TEETH
28. TO TIGHTEN
29. DEPTH ADJUSTMENTKNOB
30. TO LOOSEN
31. TO LOWER SAW
32. TO RAISE SAW
33. TOP VIEW OF SAW
34. BLADE GUIDE NOTCH
35. GUIDE LINE
36. FRONTOF SAW
37. WIDTH-OF-CUT SCALE
38. BEVELSCALE
39. BEVELADJUSTMENTKNOB
40. ADJUSTMENTSCREW
41. POSITIVE 0 BEVELSTOP
42. CARPENTER'S SQUARE
43. HEX NUT
14
GB
English
F D E I P NL S DK N FIN GR H CZ RUS PL
RO
SLO TR
HR
CCS-1801DM 1/06/05 14:53 Page 14
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ryobi ccs 1801dm one at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ryobi ccs 1801dm one in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info