489765

Ruwido M8 universal Manual

17
Zoom out
Zoom in
Previous page
1/112
Next page
17
Note :
For audio equipment, fi rst press the Shift button (
shift
) and then the
TV/CD button (
tv
/
cd
) for CD,
STB/TAPE button (
stb
/
tape
) for TAPE,
DVD/TUNER button (
dvd
/
tuner
) for TUNER or
AUX/AMP button (
aux
/
amp
) for AMP
2) Enter the code 0 0 0 9 using the numeric buttons. The signal LED fl ashes twice again.
3) Now, the signal LED lights up in green.
4) Press the button on the m_8 remote control that you would like to teach, e.g., standby (
)
5) The signal LED lights up in orange and indicates that the m_8 remote control is ready to learn.
6) Press and hold the desired button on the original remote control until the green signal LED goes off.
Note
:
Orange light indicates that the m_8 is not receiving any signal.
If the signal LED lights up in red, it means that the signal is too weak (too far away) or too strong (too near).
7) You may repeat the steps 3 to 6 to teach (or programme) other buttons. To save and end the learning function,
press the TV (
tv
), STB (
stb
), DVD (
dvd
) or AUX (
aux
) button that had been pressed earlier.
Note
:
If the buttons that have been learnt do not work properly with your equipment, or particularly if only every second
button that you press works, please carry out Advanced Learning.
Learning - Advanced
1) Press and hold the TV (
tv
), STB (
stb
), DVD (
dvd
) or AUX (
aux
) button depending on the level that you wish to
programme until the signal LED (
) fl ashes twice.
Note
:
For audio equipment, fi rst press the Shift button (
shift
) and then the
TV/CD button (
tv
/
cd
) for CD,
STB/TAPE button (
stb
/
tape
) for TAPE,
DVD/TUNER button (
dvd
/
tuner
) for TUNER or
AUX/AMP button (
aux
/
amp
) for AMP
2) Enter the code 0 0 1 0 using the numeric buttons. The signal LED fl ashes twice again.
3) Now, the signal LED lights up in green.
4) Press the button on the m_8 remote control that you would like to teach, e.g., standby (
)
5) The signal LED lights up in orange and indicates that the m_8 remote control is ready to learn.
6) Press and hold the desired button on the original remote control until the green signal LED goes off.
Note
:
Orange light indicates that the m_8 is not receiving any signal.
If the signal LED lights up in red, it means that the signal is too weak (too far away) or too strong (too near).
7) Press and hold the same button on the original remote control once again until the green signal LED goes off.
8) You may repeat the steps 3 to 7 to teach (or programme) other buttons. To save and end the learning function,
press the TV (
tv
), STB (
stb
), DVD (
dvd
) or AUX (
aux
) button that had been pressed earlier.
Operating the volume control on the TV or satellite receiver or the DVB-T / cable box
(STB) or DVD player / recorder
By default, the volume and mute controls are operated on the satellite receiver or DVB-T / cable box or DVD
player / recorder.
If you would like to operate these controls on the TV, please carry out the following steps.
1) Press and hold the TV button (
tv
), until the signal LED ( ) fl ashes twice.
2) Enter the code 0 0 0 4 using the numeric buttons. The signal LED fl ashes twice again.
If you would like to restore the volume control functions again to the satellite receiver or the DVB-T / cable box
(STB) or the DVD player / recorder, please carry out the following steps.
1) Press and hold the TV button (
tv
) until the signal LED ( ) fl ashes twice.
2) Enter the code 0 0 0 5 using the numeric buttons. The signal LED fl ashes twice again.
BA m_8 Universal, 135x215 mm CS6.indd 17BA m_8 Universal, 135x215 mm CS6.indd 17 11.09.2012 16:15:1811.09.2012 16:15:18
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido M8 universal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido M8 universal in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info