489765

Ruwido M8 universal Manual

15
Zoom out
Zoom in
Previous page
1/112
Next page
15
6) For TV, STB and AMP, hold the standby button ( ); for DVD, CD and TAPE, hold the stop button ( ) or for the
TUNER, hold button 2 (
2
) of your m_8 pressed until the equipment switches off; for DVD, CD or TAPE until
playback stops or with the TUNER, until it switches to the next programme. This step may take several
minutes.
7) As soon as the equipment responds, press the OK button (
ok
) to confi rm the programming and hold it until
the signal LED (
) fl ashes twice.
8) Test the functionality of your remote control using the standby button (
) and then with the buttons 1 to 47
(according to the function description table).
9) If the equipment responds properly to all functions, your m_8 is correctly programmed and can be used.
Note
:
It could happen, that during the search process, the m_8 fi nds several codes to which your TV set responds, but
where all buttons do not function for each code. In this case, the search process should be re-started (steps 3 to
9) until you obtain the best code. Re-starting the search process starts at the last saved programming.
Automatic search feature
Alternatively, or if either in case of manual programming or with automatic programming, the correct code for your
equipment cannot be found, you may use the automatic search feature.
1) Switch on your TV, satellite receiver or your DVB-T / cable box (STB), your DVD / Bluray player or recorder
(DVD) and your audio equipment.
2) Press and hold the TV (
tv
), STB (
stb
), DVD (
dvd
) or AUX (
aux
) button depending on the level that you wish to
programme until the signal LED (
) fl ashes twice.
Note
:
For audio equipment, fi rst press the Shift button (
shift
) and then the
TV/CD button (
tv
/
cd
) for CD,
STB/TAPE button (
stb
/
tape
) for TAPE,
DVD/TUNER button (
dvd
/
tuner
) for TUNER or
AUX/AMP button (
aux
/
amp
) for AMP
3) Using the numeric buttons, enter
the code 1 0 0 1 for TV,
the code 3 0 0 1 for STB,
the code 5 0 0 1 for DVD,
the code 6 0 0 1 for CD,
the code 7 0 0 1 for TAPE,
the code 8 0 0 1 for TUNER or
the code 9 0 0 1 for AMP.
The signal LED (
) fl ashes twice in order to confi rm that the search mode has been activated.
4) For TV, STB and AMP, hold the standby button (
); for DVD, CD and TAPE, hold the stop button ( ) or for the
TUNER, hold button 2 (
2
) of your m_8 pressed until the equipment switches off; for DVD, CD or TAPE until
playback stops or with the TUNER, until it switches to the next programme. This step may take several
minutes.
5) As soon as the equipment responds, press the OK button (
ok
) to confi rm the programming and hold it until
the signal LED (
) fl ashes twice.
6) Test the functionality of your remote control using the standby button (
) and then with the buttons 1 to 47
(according to the function description table).
7) If the equipment responds properly to all functions, your m_8 is correctly programmed and can be used.
Note
:
It could happen, that during the search process, the m_8 fi nds several codes to which your TV set responds, but
where all buttons do not function for each code. In this case, the search process should be re-started (steps 2 to
7) until you obtain the best code. Re-starting the search process starts at the last saved programming.
Code reader
The code reader can be used to display the codes that you have found in the search process so that you can
make a note of them:
1) Press and hold the TV (
tv
), STB (
stb
), DVD (
dvd
) or AUX (
aux
) button depending on the level that you wish to
programme until the signal LED (
) fl ashes twice.
BA m_8 Universal, 135x215 mm CS6.indd 15BA m_8 Universal, 135x215 mm CS6.indd 15 11.09.2012 16:15:0811.09.2012 16:15:08
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ruwido M8 universal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ruwido M8 universal in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Finnish as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info