Manual Russell Hobbs 25600-56 (page 5 of 100) (All languages)

705952

Zoom out

Zoom in

1/100

• To rell at any time during use, turn the steamer o by pressing the power button until the blue

indicator light goes out, unplug from outlet, and follow the above procedure.

• After relling, allow to reheat for 45 seconds and then prime the pump by holding the steam trigger

until steam forms.

USING

• If the label says “do not iron” or shows this icon i, t the delicate attachment and make sure to test

on an inconspicuous area prior to steaming the entire garment.

• If the label says “do not steam” or shows this icon m, do not steam the garment.

1. Hang the garment in an area that will not be aected or damaged by the heat and steam, such as on

a shower curtain rail, or in an open doorway.

2. Fit any attachment you wish to use.

3. Plug the steamer in then press the power button. The blue power button light will slowly ash,

indicating that the steamer is heating.

4. After about 45 seconds the power light will stay on, indicating the steamer is preheated.

5. Prime the water pump by holding steam trigger until steam forms.

6. To generate steam, press the steam trigger. As long as the trigger is held, steam will emit from the

steamer. When the trigger is released, the steam will stop.

7. To generate a constant ow of steam without holding the trigger, press the steam trigger and then

slide the steam trigger lock downwards. You can then release pressure on the steam trigger. To turn

the steam o, press the trigger, slide the steam trigger lock upwards, then release the trigger.

8. With your free hand keep the fabric taut. Steam the garment with slow, downward strokes, keeping

the head of the steamer in contact with the fabric.

9. When you have nished, press and hold the power button until the blue light goes out (about 3

seconds) and unplug.

10. Stand the steamer on its base and allow it to completely cool o before storing. To avoid mineral

buildup, empty the tank after each use.

Auto shut o

Your steamer will automatically switch to auto shut-o mode after being left inactive for 15 minutes. The

power button light will ash rapidly to indicate this. To resume steaming, press the steam trigger or power

button and wait for your steamer to fully reheat.

CARE AND MAINTENANCE

1. Make sure steamer is o, unplugged and completely cool.

2. Wipe all surfaces with a clean damp cloth.

3. After the steamer has been thoroughly dried, turn it back on and lightly steam over an old cloth. This

will help remove any residue left in the steam holes.

4. To avoid mineral buildup, empty the tank after each use.

Cleaning attachments

• Lint attachment: Wipe with damp cloth to clean.

• Delicate fabric attachment: Wash with cold water and small amounts of a gentle cleanser if needed.

The fabric cannot be removed.

• Upholstery attachment: The fabric can be removed and hand washed with cold water and a gentle

cleanser.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25600-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 25600-56 Manual

Product: