Manual Russell Hobbs 25600-56 (page 4 of 100) (All languages)

705952

Zoom out

Zoom in

1/100

IMPORTANT NOTES

• For best performance, we recommend using distilled, puried or ltered water in your steamer. Tap

water contains minerals that can build up inside your steamer over time and reduce its eciency or

even cause damage.

• Never use perfumes, oils or other additives.

• Always check the garment’s care label before steaming, and always test fabrics for colourfastness in

an inconspicuous area. Steamers are not recommended for use on leather, suede, vinyl, plastic, or

other materials that are sensitive to steam.

• During use the steamer and accessories will become HOT. Never try to t or remove attachments

while still hot.

• After preheating, prime the water pump by holding the steam trigger until steam forms.

• It is normal to feel or hear the water pump inside the device. It may become louder when the water

level in the tank is low. Check and rell the tank when required.

• Small amounts of dripping might occur during use. If excessive, your steamer needs time to get back

up to full temperature. Just allow the steamer a minute to reheat.

• Wearing clothes immediately after ironing or steaming can actually create wrinkles. Always allow the

clothing to cool for about 5 minutes before wearing.

ATTACHMENTS

Your steamer has three attachments:

Lint attachment

Use on garments labelled k l that allow the use of steam.

Tip: The pad on the attachment helps remove lint, hair, and animal fur.

Delicate fabric attachment

Use on garments labelled j that allow the use of steam.

Tip: For items with printing/embellishment, turn the garment inside out to

avoid damage to sensitive areas.

Upholstery attachment Use to sanitise and refresh bedding, mattresses, curtains, plush toys,

furniture, and hard surfaces (such as worktops or desks that are not heat

sensitive).

Always test for colourfastness and heat sensitivity on an inconspicuous

area.

Fitting/Removing (Fig. A)

1. Make sure that the steamer and attachment are cool.

2. Hook the top of the attachment over the top edge of the steamer.

3. Click the bottom edge into place.

4. Remove the attachment using the tab. When removing the attachment, watch out for condensation

that may have built up during use.

FILLING

1. Place the steamer on its base on a stable surface.

2. Pull out the removable water tank (Fig. B)

3. Gently open the rubber cover at the top of the tank.

4. Fill until the water reaches the “MAX” level mark on the top of the tank (Fig. C). Do not overll. Close

the rubber cover securely.

5. Dry o any excess water from the tank then ret it into the base until it clicks.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Russell Hobbs 25600-56 in the language / languages: All languages as an attachment in your email.

The manual is 1,28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Russell Hobbs 25600-56 Manual

Product: